Technical data

140 Network OS Message Reference
53-1002489-01
SEC-1312
30
SEC-1312
Message <timestamp>, [SEC-1312], <sequence-number>,, INFO, <switch-name>, <MESG Message>.
Probable Cause Indicates the password attributes changed.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1313
Message <timestamp>, [SEC-1313], <sequence-number>,, INFO, <switch-name>, The password
attributes parameters were set to default values.
Probable Cause Indicates the Password attributes were set to default values.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required.
If the security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1325
Message <timestamp>, [SEC-1325], <sequence-number>,, ERROR, <switch-name>, Security
enforcement: Switch <switch WWN> connecting to port <Port number> is not
authorized to stay in fabric.
Probable Cause Indicates that because of a switch connection control (SCC) policy violation, the switch is being
disabled on the specified port.
Recommended
Action
No action is required unless the switch must remain in the fabric. If the switch must remain in the
fabric, add the switch world wide name (WWN) to the SCC policy, then attempt to join the switch
with the fabric.
Severity ERROR
SEC-1329
Message <timestamp>, [SEC-1329], <sequence-number>,, ERROR, <switch-name>, IPFilter
enforcement: Failed to enforce ipfilter policy of <policy Type> type because of
<Error code>.
Probable Cause Indicates the IP filter policy enforcement failed because of an internal system failure.