Technical data

Network OS Message Reference 79

53-1002489-01

Chapter

HAM System Messages

HAM-1004

Message <timestamp>, [HAM-1004], <sequence-number>,, INFO, <switch-name>, Processor

rebooted - <Reboot Reason>

Probable Cause Indicates the system has been rebooted either because of a user action or an error. The switch

reboots can be initiated by the firmware download, fastboot, and reload commands. Some

examples of errors that may initiate this message are hardware errors, software errors, compact

flash errors, or memory errors. The reason for reboot can be any of the following:

• Hafailover

• Reset

• Fastboot

• Giveup Master:SYSM

• CP Faulty:SYSM

• FirmwareDownload

• ConfigDownload:MS

• ChangeWWN:EM

• Reboot:WebTool

• Fastboot:WebTool

• Software Fault:Software Watchdog

• Software Fault:Kernel Panic

• Software Fault:ASSERT

• Reboot:SNMP

• Fastboot:SNMP

• Reboot

• Chassis Config

• Reboot:API

• Reboot:HAM

• EMFault:EM

Recommended

Action

Check the error log on both CPs for additional messages that may indicate the reason for the

reboot.

Severity INFO