User manual
52DCA Intertel DCA Intertel
DCA Intertel 53 DCA Intertel
[Description] Transmits the printer ID specied by n follows:
[Notes] • This command is executed when the data is processed in
the data buffer. Therefore, there could be a time lag between
command reception and data transmission, depending on
data buffer status.
[Default]
[Reference]
[Example]
GS U
[Name] Resets the printer parameters to default.
[Format] ASCII GS U
Hex 1D 55
Decimal 29 85
[Description] Resets the printer parameters to the default conguration.
[Notes] • After executing this command the printer is initialized.
[Default]
[Reference]
[Example]
GS W n d1 ...dn
[Name] Prints n byte of a 200 dpi graphic line
[Format] ASCII GS W n d1... dn
Hex 1D 57 n d1... dn
Decimal 29 87 n d1... dn
[Range] 1 d”?n d”?48
0 d”?d1 … dn d”?255
[Description] Print n byte of a 200 dpi graphic line where :
• n species the number of byte to print;
• d1...dn specify the bytes to print.