User manual

46DCA Intertel DCA Intertel
DCA Intertel 47 DCA Intertel
[Notes] • Same as hardware reset
• After the command has been transmitted, 1.5 seconds elapse
before the printer is enabled
[Default]
[Reference]
[Example] This can be useful during switching on in order to avoid the sending
of false characters during initialization by the master device
ESC A [nH] [nL]
[Name] Executes [n] dots line feed
[Format] ASCII ESC A nH nL
Hex 1B 41 nH nL
Decimal 27 65 nH nL
[Description] Executes [n] dots line feed.
[Notes]
[Default]
[Reference]
[Example]
(dd) ESC M
[Name] Writes the value (dd) in the print mode
[Format] ASCII dH dL ESC M
Hex dH dL 1B 4D
Decimal dH dL 27 77
[Description] Sets the print mode default parameters:
$00 small character printing
$01 double width printing
$02 double height printing
$03 expanded printing
[Notes] • The setting is stored in the EEPROM
[Default] Setting by means of the front keys
[Reference] ESC m
[Example] For double height printing, transmit:
$30 $32 $1B $4D
ESC N
[Name] Set normal mode printing
[Format] ASCII ESC N
Hex 1B 4E
Decimal 27 78
[Description] Select normal mode printing:the receipt feeds out of the printer with
the printing upside down running from right to left
[Notes]
[Default] Setting in option register by means of front keys
[Reference] ESC R
[Example]