User manual

18DCA Intertel DCA Intertel
DCA Intertel 19 DCA Intertel
1.3.2 Conguration Mod. DPT100-BT
The printer set up print out (see g. 1.10) includes a range of information,
and among these should be pointed out the HEAD VOLT parameter that
indicates the battery charge level, i.e., the print head battery voltage.
The printer’s congurable parameters, with Bluetooth interface selected, are:
• Interface: BTD, RS232.
• BT Name ID(14): NO IDD, #0, #1, #2, #3, #4, #5, #6, #7, #8, #9.
• Authentication(15): Enabled, DisabledD.
• Autofeed: CR disabledD o CR enabled.
• Battery: 1000 mAh, 1100 mAh, 1200 mAh, 1300 mAh, 1400 mAh,
1500 mAh, 1600 mAh, 1700 mAh, 1800 mAh, 1850 mAhD,
Alkaline(10).
• Standby: 1min, 5minD, 10 min, 30 min, 1 h, 2h, None.
• Print mode: NormalD, revers.
• Alignment: DisableD, Enable.
• Print density: -2, -1, 0D, +1, +2.