User manual

16DCA Intertel DCA Intertel
DCA Intertel 17 DCA Intertel
1.3 CONFIGURATION
1.3.1 Conguration Mod. DPT100-B/I
The printer set up print out (see g. 1.9) includes a range of information, and
among these should be pointed out the HEAD VOLT parameter that
indicates the battery charge level, i.e., the print head battery voltage.
The printer’s congurable parameters are:
• Interface: RS232D, Infrared(8).
• IR Protocol(9): Enable, DisableD.
• Baud Rate: 38400, 19200, 9600D, 4800, 2400, 1200, 600.
• Data length: 7, 8D bits/car.
• Parity: NoneD, even or odd.
• Handshaking: XON/XOFFD or Hardware(10).
• Autofeed: CR deactivatedD or CR activated.
• Battery: 1000 mAh, 1100 mAh, 1200 mAh, 1300 mAh, 1400 mAh,
1500 mAh, 1600 mAh, 1700 mAh, 1800 mAh, 1850 mAhD , Alkaline(11).
• Standby: 1min, 5minD, 10 min, 30 min(12), 1 h, 2h, None.
• Alignment: DisableD, Enable.
• Print density: -2, -1, 0D, +1, +2.