User manual

16 DCA IntertelDCA Intertel
17 DCA IntertelDCA Intertel
5.3 Paper Loading
MP-2000 can print on UNI A4/A5 size single sheet paper
forms or multi part paper forms or continuous fan-fold
paper with hole to hole spacing of 227mm (8.94”).
The procedure for correct paper loading is the following:
● Set the printer OFF LINE
● Open the printer by lifting lever A (Fig. 2.)
● Insert single-sheet module by placing it over the
printing plate, while checking if it is equally spaced
with respect to the printing area; in case of
continuous fan-fold paper, be sure that the
sprockets engage correctly in the holes provided for
near the edges.
● Close the swiveling printer top.
● Switch the printer ON LINE again.
CAUTION
If the printer has been printing for some time it is ad-
visable not to touch the printhead during paper loading or
inkribbon cartridge replacement, as it could be very hot.
Paper feeding direction