User manual

12 DCA IntertelDCA Intertel
13 DCA IntertelDCA Intertel
4.4 Caution!
* Do Not print without inked ribbon or paper, since this
leads to rapid printhead needle wear- out.
* Do Not move the printhead manually.
* Avoid mechanical shocks.
* Before starting to print, check that the inked ribbon
cartridge is correctly installed, the paper is loaded in the
proper position and the printer’s upper swiveling part is
locked to the lower one.
* If the printer has worked for some time, avoid touching
the printhead: it can be very hot. It is advisable to wait a
few minutes before attempting to replace the inked rib-
bon cartridge.
* Once the printer has been turned off, wait at least 10
seconds before turning it on again; this allows the inter-
nal reset circuitry to work properly.
* Do Not open the printer when it is operating.
NOTICE
Turn the computer on before the printer and turn the
printer off before the computer. This is only to avoid
dummy data to be sent by the computer printer du-
ring the on/off sequence.