User manual

10 DCA IntertelDCA Intertel
11 DCA IntertelDCA Intertel
TABLE 2 - BAUD RATE SELECTION
Baud Rate SW 1-1 SW 1-2
1200 ON ON
2400 OFF ON
4800 ON OFF
9600 OFF OFF
CRLF mode = ON means that after every CR character
(carriage return) sent by the host, the printer automati-
cally performs a LF (Line Feed)
operation.
STAND-BY mode = ON means that after a certain pre-set
inactivity period, the printer goes to stand-by mode (re-
duced power drain).
If DIP-switch setting is switched ON while the printer is
on, the new conguration will come into effect only after
a subsequent printer turn-off and turn-on cycle.