Technical information

40DCA Intertel DCA Intertel
DCA Intertel 41 DCA Intertel
5. TECHNICAL INFORMATION MP 2000
5.1 Technical Specications
-printing housing Caged enclosure(for EMI suppression)
3 parts made of 1 mm Stainless Steel
Dampingpads for noise suppression
-printing method dot matrix impact printing (ballistic, 9 pins)
-printing direction horizontal, bi-directional
printing with optimum path, logic search
-paper movement forward/backward
-paper transport friction and tractor
-printing speed 150 char/s in draft mode
-paper advance speed
-draft mode: 150 ms/line typical (1/6” line spacing)
-NLQ and graphics mode 200 ms/line typical with intermittent paper advance
(1/16” line spacing)
-Continuous line
feeding ex formfeed 100 ms/line = 0.6 s/inch = 4.35 cm/s typical
-buffer capacity 2 KBytes
-MCBF 1.2x106 lines
-expected head life 300x106 strokes/needle, equal to 190x106 characters
(given an average density of 14 dots/character).
-vibration test:
3 axis sinusoidal
vibration test at 0.5 G for 15 min. along each axis
resonance frequency
3-200 Hz random vi-
bration (MIL-STD- 1 G for 30 min. along each axis
810D/514.3)
-shock test 50 G for 8ms along each axis
(non-operational mode)