Technical information
22DCA Intertel DCA Intertel
DCA Intertel 23 DCA Intertel
ESC C NUL n Page length in inches
Format:
ASCII: ESC C NUL n
decimal: 27 67 0 n
hexadecimal: 1B 43 00 n
Comment:
Page length is set to “n” inches ( 1 inch = 25.2 mm), where “n” is ranged between 1
to 12 (01hex...0Chex). The beginning of the page is assumed to be the current page
position. Any bottom margin setting established by an ESC N n command is cleared.
4.2.5 SENSORS
ESC 8 Disable Paper End Sensor
Format:
ASCII: ESC 8
decimal: 27 56
hexadecimal: 1B 38
Comment:
Paper End is disabled so that printing can be performed right down to the bottom edge
of the sheet.
ESC 9 Enable Paper End Sensor
Format:
ASCII: ESC 9
decimal: 27 57
hexadecimal 1B 39
Comment:
Cancels the ESC 8 command. Paper End sensor is enabled.
4.2.6 PRINTER STATUS
ESC # S Printer status request
Format:
ASCII: ESC # S
decimal: 27 35 83
hexadecimal: 1B 23 53
Comment:
The printer responds to this command by sending to the host a status byte, where
information about activity, batteries and paper are given as specied in the following
table (obviously, the printer can respond only when it is ON LINE).