User Guide

Digital Applications
16
Section 3
ProVocal
™
Connections
• Connect the source to the desired 1/4” TRS or XLR input.
• Connect the S/PDIF output of the ProVocal and run into the
S/PDIF input interface of the DAW (CPU).
This application allows you to send a digital signal to a receiving device (such as a DAW or digi-
tal recorder) and route the analog signal to a monitoring device (such as a mixer or headphone
amplifier) simultaneously.
Connections
• Connect the source to the desired 1/4” TRS or XLR input.
• Connect the S/PDIF output of the ProVocal and run into the S/PDIF input interface of the DAW
(CPU).
• Connect the 1/4” TRS or XLR output of the ProVocal and run into the 1/4” TRS or XLR input
of the monitoring device.
3.6 Analog and Digital Output Application
3.5 A/D Conversion
ProVocal™ User Manual