User Guide

1). Make microphone connections, being careful to keep the GAIN control in the
minimum (+30dB) position.
2). Connect the ProVocal’s Line outputs directly to the audio inputs of your recorder.
3). Enable the record function of the specific track of the recorder and open the specific tape track
return in the console which corresponds to the track to which the ProVocal is connected. As
you increase the setting of the GAIN control, you should begin to hear the input of the
ProVocal running through the recorder and returning to your console as a tape return.
Connections
• Connect the source to the desired 1/4” TRS or XLR input.
• Connect the S/PDIF output of the ProVocal and run into the S/PDIF input interface of the DAW
(CPU).
3.4 Direct Connection to a DAW (CPU)
3.3 Direct Connection to a Recorder
Applications
Section 3
ProVocal
™
15
ProVocal™ User Manual