User Guide

Getting Started
ProVocal™ User Manual
4
Section 1
ProVocal
™
Effect Select Button and LEDs
This button is used to select any one of the six effect module blocks available in the ProVocal™.
Successive presses will scroll through the effect menu. The corresponding LED will light when
the effect module is selected and will be lighted in performance mode, when the effect mod-
ule is on, or used in the current program.
Store Button
This button is used to store any program changes that have been made.
Parameter Edit knobs
These five edit knobs are used to edit the corresponding parameter of the currently selected
effect module.
Parameter Edit LEDs
These five LEDs (located beneath the Edit knob) will light when the value of the currently
selected parameter value has been changed from the currently stored value.
Power Switch
Turns the ProVocal™ on and off.