User manual

Appendix D

IEM

The Reset Device procedure causes the IEM to reboot the software as if the power had been turned off, and then

back on. If edits have been made to the current program without saving, they will be lost.

SYSEX Program Dump Sample

Following is a simple example of a SYSEX Setup dump. It takes you set by step through all of the operation com-

mands of a typical SYSEX procedure.

<<SYSEX Header>>

F0 00 01 1E 00 05

<<Procedure>>

<<Program Dump Version>>

00 01 00 01

<<Program Type and Setup Number>>

00 00 00 00

<<Setup Transmit Count...Lo Bytes, Hi Bytes>>

00 0A 00 06

<<12 Character Setup Name...dynamic>>

00 31 00 3A 00 52 00 76 00 62 00 20 00 32 00 3A 00 47 00 74 00 52 00 76

<<Null to indicate end of Character String>>

00 00

<<Misc Program Data...too dynamic to document>>

00 07 00 00 00 06 00 00 00 03 00 06 00 03 00 32 00 08 00 03 00 00 00 00 00 02 00 04 00 00 00 00 00 02 00 08 00

00 00 00 01 7E 00 00 00 00 00 20 01 7F 00 00 00 00 00 20 00 00 00 00 00 00 00 20 00 01 00 00 00 00 00 20 00 02

00 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<<SYSEX End>>

IEM User Manual

MIDI SYSEX