User manual

Detailed Parameters
®
26
Section 4
IEM
IEM User Manual
Section 4
Reverb Off-Types
This parameter is used to turn the Reverb effect off and select the various types. Types include:
Room, Club, Small Hall, and Large Hall.
Reverb Time 0.32 to 3.29 seconds
This parameter sets the decay time of the reverb algorithm.
Mix 0 to 50%
This parameter is used to control the amount of reverb that is mixed into the signal path. Mix
changes are made in .5% increments.
Spread 0 to 10
The Spread parameter controls the length of early reflections.
RTC (Room Time Constant) 1.00 to 8.00 kHz
The RTC parameter is used to simulate room absorbtion.
Rolloff 1.00 to 8.00 kHz
The Rolloff parameter is used to control the rolloff of the high frequencies at the output of the
reverb.