User manual

®
LCD Display
The large LCD display shows the program, dynamic curve, digital meters, parameters, and mod-
ules selected by the function buttons and the DATA WHEEL.
Data Wheel / Selector
The DATA WHEEL changes selected parameters, programs, etc. Pushing the DATA WHEEL
moves the cursor from parameter to parameter.
Function Buttons
The function buttons allow access to the programs, modules, utilities, and parameters of the
IEM. Bypass Note: To place the unit in bypass mode, you must press and hold the BYPASS
button for aproximatley four seconds.
Power Switch
Turns the IEM on and off.
The Curve Window
After you have chosen a program, you may want to change some of the parameters to meet
your specific needs. One of the most useful tools available in the IEM for setting up a proper
compression curve is the curve window. In the curve window you can see the combined effects
of dynamics-related parameters expressed in a graphical format. The figure below shows the
different parts of the curve window you will see as you edit the compressor and limiter func-
tions of the IEM.
When working with the EQ, the curve window changes to show a graphical representation of
the 5 parametric bands in a frequency grid. Your adjustments to the 5 bands are shown in real
time.
Parameter
measurement
units
Type IV™
conversion
indicator
Gain Reduction meter
3 parameters
per "page"
Parameter
page number
Program
number
Channel numbers
within program
stereo link indicator
Chain element
identifier
Dynamics
curve graph
Threshold
Meters
Digital input /
output meters
(peak and average)
Fig. 1.1
Getting Started
Section 1
IEM
IEM User Manual
3