User manual

Hardware

1. Connect the outputs from the mixer to the inputs of the DriveRack

2. Connect the outputs of the DriveRack

PA and run to the selected speaker amplifier.

3. Make sure that the mixer and power amps are turned off prior to powering up the

DriveRack

PA.

Software

1. From Program mode, select factory program #F2 (3 Way w/mSub) as a template, or use the

Wizard to setup the specific program.

2. Once the program has been chosen, press the DATA wheel to load the program.

5.2- 2X5 Crossover

Application Guide

Section 5

DriveRack

PA User Manual

SR4731XFSR4731XF

SR4719X

Left

Right

Right Mid

Left Mid

Mono Sub

Left Mid

Left High

Right Mid

Right High

Left High

Right High

Mono Low