User manual

®
®
®
®
®
®
• Press the <NEXT PG> button and the display will read:
• Once the gain level of the mixer has been turned down, press the
<NEXT PG> but-
ton and the display will read:
• You will now use the
<DATA> wheel to select the number of fixed filters. This will
range from values 0-12. The total number of filters will stay at 12, and the number of
live filters will be = Total Num Filters – Num Fixed. Live and Fixed filter types differ
in that FIXED mode filters are automatically assigned to a frequency creating feedback,
thus remaining at that frequency until cleared by the user. In LIVE mode, live filters
automatically detect and remove feedback frequencies in the presence of audio (music
or speech). When all of the live filters have been used, they begin to round robin.
Essentially this means that the first filter set is replaced where a new feedback is detect-
ed and notched out. This mode is useful because feedback frequencies may change
as the microphone is moved, and/or as the characteristics of the venue change.
The Fixed/Live filter usage will be indicated at the bottom of each page of the feed-
back elimination effect. ‘F’ indicates an available fixed filter, and ‘L’ indicates an avail-
able live filter
. A blocked out F or L indicates a filter that is set, or in use. Once the
desired number has been selected, press the
<NEXT PG> and the display will read:
• These types pertain to the Q, sensitivity, and algorithm type. The filter is established
by using the formula: Q= Freq divided by Bandwidth. This means that a higher Q
will produce a filter that is more narrow. Values are: Speech (Bandwidth = 1/5
octave and Q=7.25) Music Low (Narrow notch filter, Bandwidth = 1/10 octave and
Q=14.5), Music Medium (Very Narrow notch filter
, Bandwidth = 1/20 octave and
Q=29) Music High (Ultra Narrow notch filter, Bandwidth = 1/80 octave and Q=116).
To guarantee that feedback is suppressed at lower frequencies, the AFS may place
wider notch filters at these lower fr
equencies (below 700 Hz). Once the desired fixed
Auto EQ WIZARD
AFS WIZARD
DriveRack PA WIZARD
St Tri-Amp
U 1
System Setup
AFS WIZARD
DriveRack PA WIZARD
Connect mic to RTA
input. Press RTA
input button.
Auto EQ
must be pressed.
Auto EQ Warning
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
System Setup
Auto EQ WIZARD
DriveRack PA WIZARD
Select Number of
fixed filters. > 6
AFS
Select Input as MONO
or STEREO.
>STEREO
Input Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
Graphic EQ Setup
Select Main PA
JBL SRX
>SR4702X Passive
Main Speaker
Select Sub PA
>None
Sub Speaker
Select an amplifier
>Crwn MacroTech 1202
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
>0.775 Volts
High Amplifier
F F F F F F L L L L L L
Please turn down the
mixer gain. Press
AFS
NEXT PG when done.
Select fixed type
> Speech
AFS
mixer gain to
desired level.
Slowly Increase the
F F F F F F L L L L L L
Fixed Filter Setup
Done
AFS
F F F F F F L L L L L L
L R
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
Auto EQ
RESPONSE C PRECISION LOW
A
u
t
o
E
Q
Select
same as your amp
>Normal
Low Amp Bridging
Adjust level
same as your amp
>25
High Amp Level
System Setup
Auto EQ WIZARD
AFS WIZARD
RTA INPUT button
Auto EQ WIZARD
AFS WIZARD
DriveRack PA WIZARD
St Tri-Amp
U 1
System Setup
AFS WIZARD
DriveRack PA WIZARD
Connect mic to RTA
input. Press RTA
input button.
Auto EQ
must be pressed.
Auto EQ Warning
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
System Setup
Auto EQ WIZARD
DriveRack PA WIZARD
Select Number of
fixed filters. > 6
AFS
Select Input as MONO
or STEREO.
>STEREO
Input Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
Graphic EQ Setup
Select Main PA
JBL SRX
>SR4702X Passive
Main Speaker
Select Sub PA
>None
Sub Speaker
Select an amplifier
>Crwn MacroTech 1202
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
>0.775 Volts
High Amplifier
F F F F F F L L L L L L
Please turn down the
mixer gain. Press
AFS
NEXT PG when done.
Select fixed type
> Speech
AFS
mixer gain to
desired level.
Slowly Increase the
F F F F F F L L L L L L
Fixed Filter Setup
Done
AFS
F F F F F F L L L L L L
L R
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
Auto EQ
RESPONSE C PRECISION LOW
A
u
t
o
E
Q
Select
same as your amp
>Normal
Low Amp Bridging
Adjust level
same as your amp
>25
High Amp Level
System Setup
Auto EQ WIZARD
AFS WIZARD
RTA INPUT button
Auto EQ WIZARD
AFS WIZARD
D
riveRack PA WIZARD
St Tri-Amp
U 1
System Setup
AFS WIZARD
D
riveRack PA WIZARD
C
onnect mic to RTA
input. Press RTA
input button.
A
uto EQ
must be pressed.
A
uto EQ Warning
M
ic Level
Turn Up Level
Pink Level > 18dB
A
uto EQ : Pink Noise
System Setup
Auto EQ WIZARD
DriveRack PA WIZARD
Select Number of
fixed filters. > 6
AFS
S
elect Input as MONO
or STEREO.
>STEREO
I
nput Setup
S
elect GEQ as Dual
Mono or Stereo
>Dual Mono
G
raphic EQ Setup
S
elect Main PA
JBL SRX
>SR4702X Passive
M
ain Speaker
S
elect Sub PA
>None
S
ub Speaker
S
elect an amplifier
>Crwn MacroTech 1202
H
igh Amplifier
S
elect Sensitivity
Crwn MacroTech 1202
>0.775 Volts
H
igh Amplifier
F F F F F F L L L L L L
Please turn down the
mixer gain. Press
AFS
NEXT PG when done.
Select fixed type
> Speech
AFS
mixer gain to
desired level.
Slowly Increase the
F F F F F F L L L L L L
Fixed Filter Setup
Done
AFS
F F F F F F L L L L L L
L
R
M
ic Level
Turn Up Level
Pink Level > 18dB
A
uto EQ : Pink Noise
Auto EQ
RESPONSE C PRECISION LOW
A
u
t
o
E
Q
S
elect
same as your amp
>Normal
L
ow Amp Bridging
A
djust level
same as your amp
>25
H
igh Amp Level
System Setup
Auto EQ WIZARD
AFS WIZARD
RTA INPUT button
Auto EQ WIZARD
AFS WIZARD
DriveRack PA WIZARD
St Tri-Amp
U 1
System Setup
AFS WIZARD
DriveRack PA WIZARD
Connect mic to RTA
input. Press RTA
input button.
Auto EQ
must be pressed.
Auto EQ Warning
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
System Setup
Auto EQ WIZARD
DriveRack PA WIZARD
Select Number of
fixed filters. > 6
AFS
Select Input as MONO
or STEREO.
>STEREO
Input Setup
Select GEQ as Dual
Mono or Stereo
>Dual Mono
Graphic EQ Setup
Select Main PA
JBL SRX
>SR4702X Passive
Main Speaker
Select Sub PA
>None
Sub Speaker
Select an amplifier
>Crwn MacroTech 1202
High Amplifier
Select Sensitivity
Crwn MacroTech 1202
>0.775 Volts
High Amplifier
F F F F F F L L L L L L
Please turn down the
mixer gain. Press
AFS
NEXT PG when done.
Select fixed type
> Speech
AFS
mixer gain to
desired level.
Slowly Increase the
F F F F F F L L L L L L
Fixed Filter Setup
Done
AFS
F F F F F F L L L L L L
L R
Mic Level
Turn Up Level
Pink Level > 18dB
Auto EQ : Pink Noise
Auto EQ
RESPONSE C PRECISION LOW
A
u
t
o
E
Q
Select
same as your amp
>Normal
Low Amp Bridging
Adjust level
same as your amp
>25
High Amp Level
System Setup
Auto EQ WIZARD
AFS WIZARD
RTA INPUT button
Getting Started
Section 1
DriveRack
®
PA
9
DriveRack
®
PA User Manual