Application Guide

ANALOG INPUTS:
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA Mic
input
Type: Electronically balanced/RF filtered
Impedance: > 40k Ω
Max input line level: +34dBu with input jumpers in +30 posi-
tion
CMRR: > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -110dBu, 22Hz-22kHz, 150Ω
ANALOG OUTPUTS:
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced, RF filtered
Impedance: 120 ohms
Max Output Level: +22dBu
A/D PERFORMANCE:
Type: dbx Type IV conversion system
Dynamic Range line: >114 dB A-weighted, >112 dB unweighted
Type IV dynamic range: >119 dB, A-weighted, 22kHz BW
>117 dB, A-weighted, 22kHz BW
Sample Rate: 48kHz
D/A PERFORMANCE:
Dynamic Range: 112 dB A-weighted, 110dB unweighted
SYSTEM PERFORMANCE:
Dynamic Range: >110 dB unweighted, >107dB weighted,
THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input
gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >110dB, 120dB typical
Crosstalk input to output: >100dB
SAFETY AGENCY APPROVALS:
UL 6500, IEC 60065, EN 55013, E 60065
Specifications
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
Complete Equalization & Loudspeaker Management System
DriveRack 260
®
dbx Professional
Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
1.801.568.7660 PHONE
1.801.568.7662 FAX
1.801.568.7583 INT’L FAX
[e-mail]
www.dbxpro.com
Part number: 18-0000