User's Manual

DriveRack PA2 Control Application

The DriveRack PA2 control application is available for Android

™

, iOS

, Mac

, and Windows

compatible devices. This application

is available for free and can be downloaded on the iTunes Store

, Google Play™, or from www.dbxpro.com.

The DriveRack PA2 control application can be used to perform most of the same functions available from the DriveRack

PA2’s front panel, this includes running all Wizards, viewing the RTA, editing system and processing parameters, and managing

presets. The DriveRack PA2 control app also adds the ability to connect directly to the online tuning database (Internet

connection required), where you can download additional tunings from Crown

JBL

, dbx

, and more!

NOTE: You can control one PA2 device on the network at a time using the PA2 control app. Multiple control devices

can be connected to the PA2 simultaneously, however, it is best to control the PA2 from only one device at a time for best

performance. For example, you may have the app running on a laptop that sits next to the mixing console and remains

active during the entire performance and used for the RTA and occasional tweaks, and then use a tablet periodically when

walking around the venue and making adjustments. Performance will be determined by the speed of the wired and/or

wireless network. Generally speaking, connecting up to 3 apps simultaneously should work fine on standard 10/100 Mbps

wired and 802.11n Wi-Fi networks.

Device Requirements

Visit dbxpro.com for the latest information on device requirements for the DriveRack PA2 control application.

NOTE: A DHCP (Dynamic Host Configuration Protocol) enabled router or switch must be used in the PA2 control

network to assign an IP address to the PA2. See ‘Making Connections’ on page 8 and ‘Networking’ on page

57 for more information on connecting and setting up a network for PA2 control.