Specifications

The list below shows how different reverb settings can be recalled using
Program Changes. Program Change command -0- toggles the 290's
Bypass mode status. Program changes -1- to -54- can also be used to exit
the Bypass mode and select a new reverb setting (if so desired). After
responding to a valid Program Change request, the 290 will reset the
decay time to the 12 o'clock position (decay setting number 5) regardless
of where the reverb decay control is set. Any Program Change higher
than -54- will be ignored by the 290.
Prg # Type Size Color Prg # Type Size Color
0 Bypass (Toggle On/Off)
1 Room Small Dark 28 Plate Small Dark
2 Room Small Med 29 Plate Small Med
3 Room Small Bright 30 Plate Small Bright
4 Room Med Dark 31 Plate Med Dark
5 Room Med Med 32 Plate Med Med
6 Room Med Bright 33 Plate Med Bright
7 Room Large Dark 34 Plate Large Dark
8 Room Large Med 35 Plate Large Med
9 Room Large Bright 36 Plate Large Bright
10 Hall Small Dark 37 Cathdrl Small Dark
11 Hall Small Med 38 Cathdrl Small Med
12 Hall Small Bright 39 Cathdrl Small Bright
13 Hall Med Dark 40 Cathdrl Med Dark
14 Hall Med Med 41 Cathdrl Med Med
15 Hall Med Bright 42 Cathdrl Med Bright
16 Hall Large Dark 43 Cathdrl Large Dark
17 Hall Large Med 44 Cathdrl Large Med
18 Hall Large Bright 45 Cathdrl Large Bright
19 Chmbr Small Dark 46 Gated Rise Dark
20 Chmbr Small Med 47 Gated Rise Med
21 Chmbr Small Bright 48 Gated Rise Bright
22 Chmbr Med Dark 49 Gated Flat Dark
23 Chmbr Med Med 50 Gated Flat Med
24 Chmbr Med Bright 51 Gated Flat Bright
25 Chmbr Large Dark 52 Gated Decay Dark
26 Chmbr Large Med 53 Gated Decay Med
27 Chmbr Large Bright 54 Gated Decay Bright
Note: Program changes 1 through 54 will also exit Bypass mode.
Stereo
Reverb
290
11
Operation