User Manual

Access Codes
Access codes
There are several codes required to access
the handset and SIM card. The access
codes allow you to avoid unauthorized use
of your phone and SIM card.
PIN code
The PIN (Personal Identification Number)
protects the card against unauthorized use.
This code is supplied with the SIM card. If
the PIN is activated, the code is requested
when the phone is switched on.
If you enter an incorrect PIN code three
times in succession, the SIM card is
blocked; key in the PUK code.
PIN2 code
This code is supplied with the SIM cards
and is required to access certain functions,
such as accumulated costs. If your SIM
card supports those particular functions,
you can activate them in your handset. If
you enter an incorrect PIN2 code three
times in succession, the PIN2 code is
blocked and you will be asked for the PUK2
code.
PUK code
The PUK (Personal Unblocking Key) code
is used to unblock and change the locked
PIN code. This code may be supplied with
the SIM card. If this is not the case, check
with your network service provider for the
code. If you enter an incorrect PUK code
ten times in succession, your SIM card will
no longer be valid.
Contact your network service provider to
replace the SIM card.
PUK2 code
The PUK2 code is used to unblock and
change the locked PIN2 code. This code is
supplied with the SIM card. If you enter an
incorrect PUK code ten times in succession,
the functions that require PIN2 code in
order to be activated will no longer be valid.
Contact your network service provider to
replace the SIM card.