User Manual

PhoneBook 2
Phone Book
The “PhoneBook” is used to save phone
numbers and names in the handset or SIM
card. You can save up to 500 entries in the
handset. The SIM card capacity may vary
depending on the network service provider.
In idle mode, proceed as follows:
1. Press
to enter main menu.
2. Scroll to “PhoneBook” with
.
3. Press
to access the menu.
View
You may view the names and phone
numbers that have been stored in the
handset or the SIM card.
Search Name
1. Press
to access the menu.
2. Enter the name you want to search or
key in the letter that corresponds to the
first letter of the name require in the
phone book and press
.
Note
Icons for easy identification will be shown
on the screen when the entry is stored in
the handset memory. For example, icons
that indicate the place where the data is
stored, the type what the number is
(handset, office, home or etc.) and which
group the data has been assigned to
(family, friend, workmate or VIP).
3. Scroll to the desired name or phone
number and press
to dial the
number.
Group
1. Scroll to the desired group and press
.
2. Select the desired phone number or
name and press
to make a phone
call.
Note
You may access the submenus by pressing
to continue with the further operation if
necessary.
Add New
Add a new entry to the handset or the SIM
card.
1. Press to access the menu.
2. Key in the phone number and press .
3. Select “Add Name”, “Quick Save”, or
“Add To Exist Name” and press .
4. If “Add Name” is selected, perform the
following steps:
(1) Key in the name and press
.
(2) Select either “Save To SIM” or “Save
To Handset” and press
.
(3) If “Save To SIM” is selected, key in the
location number to where the entry to
be saved and press
.
(4) If “Save To Handset” is selected, select
the desired group and press .
(5) Select either “Handset”, “Office” or
“Home” to define the attribution of the
entry.
5. If “Quick Save” is selected, the entry will
be stored in the handset without editing.
6. If “Add To Exist Name” is selected,
perform the following steps:
(1) Select the desired name or phone
number and press
.
(2) Scroll to the field that is allowed for a
new number and press .
(3) If the selected field has existed a
phone number, you will be asked
whether or not to overwrite the old
number.
Note
 To key in the country code, press and
hold until the international dialling
code “+” is displayed then key in the
appropriate country code. The steps for
dialling from abroad are the same as
above.
 To key in an extension number, key in the
pause code “W” or “P” (press and hold
, once for “W”, twice for “P”) before
entering the extension number. This
feature requires the private branch
exchange with the DTMF function.