User Manual

Camera 1
1. Press to access the option.
2. Scroll to the desired photo size and
press
to set the image size.

640*480
Capture image with 640*480 pixel.

160*120
Capture image with 160*120 pixel.
Photo quality
You can choose the quality level of the
images by preference.
1. Press
to access the option.
2. Scroll to the desired option and press
to set the photo quality.
Note
The higher the photo quality, the more
memory the image consumes.
Photo effect
This option allows you to set the effect of
the images.
1. Press
to access the option.
2. Scroll to the desired option and press
to set the photo effect.
Self timer
This option allows you to take pictures
electronically controlled with a few seconds
delay.
Note
If activated, press or , the self-timer
starts beeping and beeps at a higher
frequency for the final few seconds as a
warning signal.
Disabled
Deactivate the function.
10 Seconds
Takes photo with 10 seconds delay after
you have pressed
or
.
15 Seconds
Takes photo with 15 seconds delay after
you have pressed
or
.

30 Seconds
Takes photo with 30 seconds delay after
you have pressed
or
.
Night mode
Enable the night mode when capturing an
image at night.
Profiles
Set the frequency of the flashlight to 60Hz
or 50Hz.
Storage media
Select the storage location for saving the
pictures.
Interval shooting
Set the time for interval shooting when
capturing image.
Photo Frame
Set the frame for the taken photo. There
are 3 embedded frames for you to choose
from.
Settings
This option allows you to make certain
settings of the built-in camera.

Photo flash
Enable the camera flash when capturing
images.

Capture sound
When activated, a shutter sound will be
heard when capturing.

Auto Off
When activated, the preview in idle mode
will be cancelled automatically if no action
is taken for an extended period.
Photo album
This function allows you to view, check the
information, rename, and delete the
pictures you have taken. For detailed
operation, please refer to “Photo album” of
“Take picture”.
Photograph
This function allows you to capture moving
images and make some certain settings on
recording.
1. Press
to access the viewfinder
mode. You may preview the scenery on
the main LCD display.
2. Press
to start recording. While
recording, a flashing red light will appear
on the upper-left corner of the LCD
display.
3. Press to pause (press again to go
on).