User Manual

Quick & Easy
Quick & Easy
This page provides some of the basic
operations for using your phone. For more
detailed information, refer to “User
Manual”.
Before Use
1. Remove the battery and insert your SIM
card, then re-install and charge the
battery. For more details, please refer to
“Installation”.
2. Press and hold
to turn on your phone.
Wait until the name of the network
operator appears on the screen.
Call Functions
Making calls
In idle mode, key in the area code, the
phone number and press
to make a
call.
Answering calls
Press or to answer a call.
Alternatively, simply open the phone cover
to answer a call if the handset cover is
closed (if “Flip Answer” is activated).
Hands free conversation
Press and hold to use the hands free
function for conversation.
Terminating calls
Press or simply close the phone cover
to end an active call.
Refusing calls
Press or or simply close the
handset cover to refuse an incoming call.
Alternatively, press and hold
or to
reject the incoming call without opening the
handset cover.
Emergency calls
In idle mode, key in the emergency call
number and press
to contact the local
emergency services center.
PhoneBook Functions
Add new
Adding new numbers and names to
handset or SIM card.
1. In idle mode, key in the phone number
and press
.
2. Select either “Add Name”, “Quick Save”
or “Add To Exist Name” and press
.
3. If “Quick Save” is selected, the entry will
be stored in the handset without editing.
4. If “Add Name” is selected, perform the
following steps:
(1) Key in the name and press
.
(2) Select either “Save To SIM” or “Save
To Handset” and press .
(3) If “Save To SIM” is selected, key in the
location number to where the entry to
be saved and press
.
(4) If “Save To Handset” is selected, select
the desired group and press to
continue setting the related
information.
(5) Select “Handset”, “Office” or “Home” to
define the attribution of the entry.
5. If “Add To Exist Name” is selected,
perform the following steps:
(1) Select the location of the new number
and press
.
(2) If the selected location exists a number,
it will be replaced; if the selected
location is blank, the new number will
be saved there.
Note
If the selected entry exists in the SIM card,
the old number will be replaced.
Other Functions
Clear screen
Press and hold to clear an entry that
you are editing.
Adjusting the earpiece volume
You can adjust the earpiece volume by
using
or to increase or decrease the
volume during a call.
Backlight
Backlight
When pressing a key or answering an