J6 USER MANUAL DBTEL is a registered trademark of DBTEL Incorporated. Copyright © 2004 DBTEL Incorporated. All rights reserved. No part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. DBTEL Incorporated reserves the right to make changes in technical and product specifications without prior notification. Address: No.29, Tzu Chiang St, Tu-Cheng, Taipei, Taiwan.
Notice To reduce exposure to electromagnetic radiation, use the handset properly. SAR Radiation Limit: 1.6 W/Kg Tested SAR Rating: 0.713 W/Kg (CAUTION - It's required to provide at least 1.5 cm separation between the device and the user body.) Safety Information DBTEL handset is the first Specific Absorption Rate (SAR) compliance in Taiwan. Compliance with International standard SAR Radiation Limit: 1.6 W/Kg Tested SAR Rating: 0.
1093) & FCC OET Bulletin 65”.
Contents
European Union - SAR FCC - SAR SAR (FCC) This Model phone meets the FCC Requirements for exposure to radio waves. Your Mobile Phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by the Council of the European Union. These limits are part of comprehensive guidelines and established permitted levels of RF energy for the general public.
For Your Safety For Your Safety Road safety Exercise proper control of the car at all times. Do not use handheld phones while driving; always use the hands free kit. Special regulations Always switch off your mobile wherever use is prohibited, such as in hospitals, as it may cause interference with medical equipment. Electronic devices Mobile phones may interfere with appliances such as computers, televisions and other radio equipments.
Your J6 Your J6 Your phone Key description Your mobile phone is a radio transceiver. When the phone is turned on, it transmits and receives radio frequency (RF) signals. The side and opened view of the J6 handset are shown below: The following tables provide you with a description of the keys on the keypad. 1. Side soft key 2. Main LCD display 3. Clear key / phone book access key 4. Sub LCD display 5. Call key 6. Power key/End call key 7. 4-way navigation key 8. Irda port 9.
Your J6 and the earpiece or headset during a call. Press and hold to reject an incoming call with the handset cover opening or closing. Press once to switch the incoming call alert from ring tone to vibrator. Press and hold to activate the backlight of sub LCD display. Alphanumeric key table Key UPPER CASE (ABC) lower case (abc) Display indicators A number of status indicators are shown at the top of the screen to tell you of the relevant settings of your handset.
Your J6 downloaded. MMS. Shown when an MMS message has been received and downloaded. Status indicators on sub display When the handset cover is closed, the external display will show status indicators such as time, signal strength, battery level, caller ID, new message, missed call, alarm and etc. Some of the icons listed below may not be available at a given time. Backlight When pressing a key or answering an incoming call, the backlight will automatically turn on for a few seconds.
Installation Installation Installation of the SIM card and the battery Note Keep the SIM card and batteries out of the reach of small children. Before proceeding, ensure that the phone is switched off. 1. Pull the battery cover catch on the back of the phone upwards with one hand and lift the battery cover with the other hand. 4. Replace the battery with its catch pins inserted into the catch slots and push it downwards until it clicks into place.
Battery Information Battery Information Battery charging Note Use only the approved battery and charger supplied by the phone manufacturer. 1. Plug the connector of the travel charger into the charger port at the bottom of the phone. 2. Plug the charger into the AC power supply socket and the battery indicator will start scrolling. 3. If the battery is completely flat, the battery will take a few minutes to charge after connecting it to the power supply. 4.
Quick & Easy Quick & Easy This page provides some of the basic operations for using your phone. For more detailed information, refer to “User Manual”. Before Use 1. Remove the battery and insert your SIM card, then re-install and charge the battery. For more details, please refer to “Installation”. to turn on your phone. 2. Press and hold Wait until the name of the network operator appears on the screen.
Quick & Easy incoming call, the backlight will automatically turn on for a few seconds.
Menu Map Menu Map 1 照相机 拍照 摄像 照片管理 照片编辑 相册一 相册二 相册三 相册四 删除 按相册删除 清空所有相册 相册更名 相册一 相册二 相册三 相册四 内存信息 摄像管理 拍照设定 目的相册 相册一 相册二 相册三 相册四 拍照效果 底片效果 曝光过度 黑白照片 怀旧效果 浮雕效果 轮廓效果 正常效果 影像品质 精细 标准 基本 快门伴音 开启 关闭 定时拍照伴音 开启 关闭 拍照模式 普通 夜间 设置图片大小 160*120 320*240 640*480 1280*960
Menu Map 环境设置 50HZ 60HZ 大头贴 关闭 大头贴 1 大头贴 2 大头贴 3 使用说明 2 PhoneBook View Search Name Group Add New Add Name Quick Save Add To Exist Name Group Setting Melody Add New Delete Copy Copy All Select Copy Delete SIM All Handset All Select Delete Fixed Dial List Activate Add New View Memory Info One Touch Key Change Delete View Phone Status Service Hotline
Menu Map 3 4 Message SMS Create Inbox Outbox Draftbox Delete Voice Mailbox Broadcast Phone Status MMS Create Message Inbox Outbox Report Delete Message settings SMS Settings MMS Settings Records Dialed calls Call Add Name Quick Save Add To Exist Name Delete Received Calls Call Add Name Quick Save Add To Exist Name Delete Missed Calls Delete All Call Register Call Add Name Quick Save Add To Exist Name Delete Call Timer Call Cost Show Balance Last call
Menu Map 5 Profiles Normal Mute Meeting Outdoor Customized Activate Preference Activate Edit Power On/Off Alert Rename 6 Clock Alarm Date Setting Time Setting Display Mode Time Zone Auto Power Off Auto Power On Calendar Off On 12 Hour 24 Hour Off On Off On Incoming Call Alert Ringing Tone Ringer Volume SMS Alert Key Tones Keytone Volume Lid Sound Power On /Off Alert Incoming Call Alert Ringing Tone Ringer Volume SMS Alert Key Tones Keytone Volume Lid Sound
Menu Map 7 Settings Normal Settings Languages Input Method Earpiece Volume Headset Handsfree Any Key Answer Auto Answer Flip Answer 充电指示灯 Factory Settings LCD Wallpapers Background Color LCD Contrast Backlight Call Settings Own Number Sending Call Divert Call Barring Call Waiting Network Settings Preferred Select Mode Security Settings PIN code Change PIN2 Change Barring Code Time&Cost Settings Calling Display Charge Rate Cost Limit Short Cut Key Up Key Down Key Left Key Right Key Irda Settin
Menu Map 9 Extras My Collections My Pictures My Melodies Record 来电肖像 JAVA™ JAVA™ List Download Settings Memory State AboutJAVA™ Game Tank War RedCap Blackjack Gobang Elf Setting Notebook New Notepad Select Time Read All Notebook Delete Alarm Melody Calculator 10 WAP Homepage Bookmarks Last Page Navigation WAP Settings History i-hi 娱乐地带 新浪 雅虎 乐在其中 移动梦网 中国移动 中国联通 Profile 3－Profiel 5 GSM Link GPRS Data Flow Clear Cache 11 STK The availability depends on your network operator.
Call Functions Call Functions Turning your phone ON and OFF Press and hold for 3 seconds and then release it. Note Always switch off your phone whenever it is forbidden to use it or when it may cause interference or danger. When PIN is requested SIM cards are usually protected with a PIN code. The PIN code usually comes with your SIM card provided by the network operator. 1. Key in your PIN code (note that the characters in your password are replaced with “*”). 2.
Call Functions number with Making calls 1. In idle mode, key in the area code and the phone number. Press to delete the last digit. Press and hold for 3 seconds to clear the whole number. 2. Press to dial the number. 3. Press or stop dialling. to end an active call or When in idle mode, key in 02154422999 to make the phone call. International calls 1. When in idle mode, press and hold until a “+” sign appears, then key in the country code, the area code and the phone number accordingly. 2.
Call Functions listed in In-call menu may not be available at a given time and vary depending on your network operator. Answering calls 1. Press to answer an incoming call. Alternatively, simply open the phone cover to answer a call if the handset cover is closed (if “Flip Answer” is activated). 2. Press to end the call. 3. Press or to refuse an incoming call.
Call Functions function described above. Swap Switches between the active call and the call on hold when in call waiting mode. Call Divert Transfers the call to another phone number. Send SMS For detailed operation, please refer to the function described above. Build Multiparty Call Starts a multiparty conference call up to 7 participants. For detailed operation, please refer to “Multiparty”. Phone Book For detailed operation, please refer to the function described above.
Call Functions multiparty conference call. 3. To add a new participant to the multiparty conference call, place the existing conference call on hold, establish a new call connection with the new incoming call and repeat step 2. 4. To release a participant from the to enter the conference call, press In-call menu. Select “End component” and press . Press again to release the selected participant. 5. To have a private conversation with one to enter the of the participants, press In-call menu.
Call Functions alphanumeric keys enter words with a single key press instead of multiple key presses. When the first (or second) element is entered, the display shows the most probable word in the suggestion area The word you select from the suggestion area will move to the text area. 1. Switch to Predictive Text input by repeatedly until the pressing desired input style appears. 2. For example, to input “Telephone”, key in the following: 3. Press vertically to select the desired word and press . 4.
Using The Menu Using The Menu This handset offers a range of functions that allow you to customize the phone to your needs. These functions are arranged in menus and submenus. Accessing the menu function 1. In idle mode, press facility. to go to the menu 2. Scroll to the desired menu with . 3. Press to enter the desired submenu. 4. Scroll to the desired submenu with . 5. Press to access the submenu. up or down to access the 6. Press next menu of the selected submenu. 7. Press to confirm setting.
Camera Camera This function is the application of built-in digital camera. It allows you to take pictures (both still and moving images) and make certain settings on the pictures. You can also send images in a multimedia message, as an e-mail attachment or via infrared connection. The camera produces JPEG images. In idle mode, proceed as follows: 1. Press to enter main menu. 2. Scroll to “Camera” with 3. Press . to access the submenu.
Camera 1. Press to access the option. 2. Scroll to the desired photo size and press to set the image size. 640*480 Capture image with 640*480 pixel. 160*120 Capture image with 160*120 pixel. Photo quality You can choose the quality level of the images by preference. to access the option. 1. Press 2. Scroll to the desired option and press to set the photo quality. Note The higher the photo quality, the more memory the image consumes. Photo effect This option allows you to set the effect of the images.
Camera 4. Press or to stop recording and save the video clip in “Photograph album”. To adjust some certain settings before capturing, perform the following steps: 1. Press menu. to enter the “Photograph” 2. Press to access the following menu. Photo effect This option allows you to set the effect of the video clips. Night mode Enable the night mode when recording at night. Profiles Set the frequency of the flashlight to 60Hz or 50Hz. Storage media Select the storage location for saving the video clip.
PhoneBook Phone Book The “PhoneBook” is used to save phone numbers and names in the handset or SIM card. You can save up to 500 entries in the handset. The SIM card capacity may vary depending on the network service provider. to enter main menu. 2. Scroll to “PhoneBook” with 3. Press 1. Press to access the menu. 2. Key in the phone number and press 3. Select “Add Name”, “Quick Save”, or . . (1) Key in the name and press (2) Select either “Save To SIM” or “Save . to access the menu. .
PhoneBook Group Setting 3. Press to confirm the selecting and begin to copy the entry/entries you selected. Handset To SIM Perform the procedure described above to continue with the copying operation. You may organize your phone book data into groups and set a specific ring tone for each group. Melody Set the specific melody for the groups in order to identify the caller efficiently. 1. Scroll to the desired group and press 2. Select the favourite melody and press 2 . .
PhoneBook next operation with “Change”, “Delete” or “View”. Phone Status You can check the memory capacity of the handset and the SIM card. For example: 50/500 means that there are a total of 500 entries; 50 entries have been saved with memory still available for 450 more memories. The phone status of the SIM card may vary depending upon the memory capacity of the SIM card. Service Hotline If you have any questions about our products, please dial our tool-free hotline: 800-820-8118.
Message Message This menu allows you to send, read and write text messages, listen to the voice message and access relevant features that are provided by your network service provider. In idle mode, proceed as follows: 1. Press to enter main menu. 2. Scroll to “Message” with 3. Press . to access the menu. SMS This option allows you to read, send and write the text messages. Create You may write messages up to 160 characters in English. After you have written your message, press .
Message Save” option for the written message. You may access the following options by pressing after reading. Send Forward the received message to other. Delete Delete the message. Send To Many Forward the received message to more than one person at a time. Move Remove the selected message to the “Archive” for well organizing. Draftbox This option stores the messages that you have written but as yet unsent to others.
Message capacity of the handset is 200 entries. MMS This function allows you to send, read and edit multimedia messages including text, pictures and sounds. Note The availability of MMS message depends on your network operator. Only devices that support MMS message can receive and display MMS message. Create Message You may write messages up to 512 characters in English manually or press to add in text message from datacenter.
Message message. Note If an new MMS message has been received and not yet been downloaded, will appear on the top of LCD display with a notification tone. If the MMS has already been downloaded, will be appeared at the top of LCD display. Outbox This option stores the MMS message that has failed to be sent, saved for sending later and sent successfully. MMS Pending Stores the MMS message that has failed to to continue with the next be sent. Press operation.
Message Reject Ads Set whether or not to bar any advertisements. Append Signature Set whether or not to add your signature into the MMS message. If so, choose “Yes” and start editing your signature. Validity Period Set whether or not to set the period the service center keeps the unreachable MMS message for you. If so, choose “Yes” and set the period. Network Settings Input the IP address and MMS URL of a network operator in order to receive an MMS message.
Records Records This option provides a record of call duration, call cost, recent calls and relevant settings. Some of the functions require the PIN 2 code in order to access them. For information on the PIN 2 code, please refer to “Security Settings”. In idle mode, proceed as follows: 1. Press to enter main menu. 2. Scroll to “Records” with 3. Press . to access the menu.
Profiles Profiles This menu allows you to customize your handset settings for difference occasions. 3. Press . 4. Select one of the desired alert types and to enter main menu. 2. Scroll to “Profiles” with . to access the menu. You may have different setting for a particular environment that is provided as below: Normal Default setting of the handset. Mute The alert tone of the incoming call is set to not ring and vibrate for any incoming call.
Clock Clock 6 This menu shows the options for setting the alarm, date and time, display mode (display the date and time on the LCD display), time zone, auto power off and calendar. Display Mode In idle mode, proceed as follows: You may check the current local times all over the world. 1. Press to enter main menu. 2. Scroll to “Clock” with 3. Press . to access the menu. Alarm Sets the handset to ring at a specific time with the desired ring tone. . 1. Scroll to “On” and press 2.
Settings Settings This menu shows the options for setting the functions related to the phone itself, for example normal settings that includes language, input method and etc, call settings, network settings, security settings that includes PIN code and change PIN2 code and time and cost settings. 1. Press to enter main menu. 2. Scroll to “Settings” with 3. Press Factory Settings Restores some of the functions set in the phone to their original configuration.
Settings Football team. Foreground display You may like to display wallpaper in the foreground of the main LCD display when the handset is in idle mode. 1. Text Display Displays only the date and time when the phone is idle. 2. Simulate Clock Displays not only the date and time but also a simulate clock in foreground when the phone is idle. 3. Calendar Displays not only the date and time but also a calendar in foreground when the phone is idle. 4.
Settings country (i.e., the country where the phone is registered). All Incoming Calls All incoming calls are barred. All Incoming When Roaming No incoming calls will be permitted when registered with a system other than the original one. Cancel All Cancel all the call restriction functions. Call Waiting This option alerts you of an incoming call while on line. If activated, a tone and a notification message and the caller number will notify you of a new incoming call when you are on the phone.
Settings option. The PIN2 code is provided together with the SIM card and is only used when accessing some specific options (such as “Charge Rate”). It will only be available if SIM cards and the network service provider propose this facility. Perform the procedures described in “PIN code” to change the PIN2 code. Note If an incorrect PIN2 code is entered 3 times in succession, the SIM card will be blocked automatically.
Extras Extras This option provides additional options to enable the user to personalize the phone. It may be used to simplify the handset and includes a calculator and even offers the possibility of downloading the favorite melody or wallpaper and playing games. In idle mode, proceed as follows: 1. Press to enter main menu. 2. Scroll to “Extras” with 3. Press . to access the menu. My Collections You may download any favorite picture or melody from the web or record audio by yourself.
Extras games. Tank War to enter the submenu. 1. Press 2. Select “ Start Game” to start the game, select “Game Level” to choose the level of the game, select “Help” to read the brief help text of the game. , , and 3. Press up, down, left and right. Press fire. RedCap to go to to enter the submenu. 1. Press 2. Select “ Start Game” to start the game, select “Game Level” to choose the level of the game, select “Help” to read the brief help text of the game. , , and 3. Press up, down, left and right.
WAP WAP 9 WAP (Wireless Application Protocol) is a global wireless protocol specification for mobile wireless terminals. WAP enables you to subscribe to certain Internet services, for example: banking services, news, weather forecast, flight schedules etc. Note You need to subscribe to the data transmission and WAP browsing services via your service provider in order to access WAP services. to start 4. Scroll to “Go” and press connection.
WAP Navigation You may key in the URL that you want to connect to. WAP Settings This option allows you to activate the connection profile you want. Scroll to the required profile and press to enter the submenu. Activate Activate the connection to the WAP service. Name Edit Change the name of the connection profile. Setting Homepage Enter a URL and set it as a homepage for WAP connecting. Security Setting Avoid the WAP browsing from an unsafe content.
STK STK This menu is shown only if your SIM card provides additional services. The name and contents of this menu depend on the services available. For availability, rates and information on using the SIM card services, check with your network service provider.
Maintenance Maintenance Your mobile telephone is a radio transceiver, built with precision electronic parts, and it needs to be used with care. Observing the following recommendations may prolong the phone’s life. Please note the following points: Keep the phone and its accessories out of the reach of small children. Keep it dry. Avoid contact with liquids. Humidity and liquids contain minerals that corrode electronic circuits.
Access codes Access Codes There are several codes required to access the handset and SIM card. The access codes allow you to avoid unauthorized use of your phone and SIM card. PIN code The PIN (Personal Identification Number) protects the card against unauthorized use. This code is supplied with the SIM card. If the PIN is activated, the code is requested when the phone is switched on. If you enter an incorrect PIN code three times in succession, the SIM card is blocked; key in the PUK code.
Reference Information Reference Information EFR encoding function decoder The J6（GSM/DCS）is equipped with the latest encoding decoder and audio frequency technology, to achieve superior audio quality. At present, there are 3 types of encoding decoder compatible with GSM/DCS: yEnhance full rate （EFR） yFull rate （FR） yHalf rate （HR） The J6 (GSM/DCS) mobile phone supports the normally-used EFR and FR encoding decoder. All GSM and DCS cellular networks and phones support FR encoding decoder.
Problem Solving Problem Solving Problem Solving 1. When you switch on your phone, “Insert SIM card” is displayed a. Check that the SIM card is correctly installed. b. Ensure that the gold chip is not damaged or scratched. c. Check the SIM card contact. If they are dirty, clean them with an antistatic cloth. 2. When your phone shows “PIN”, “PIN2”, “PUK”, “PUK2”, and “Barring code”. a. Please contact your network service provider for the numbers. b.
Index Index
Issue July, 2004
