User Manual

Quick & Easy
10
Quick & Easy
This page provides some of the basic operations for
using your phone. For more detailed information,
refer to “User Manual”.
Before Use
1. Remove the battery and insert your SIM card,
then re-install and charge the battery. For more
details, please refer to “Installation”.
2. Press and hold
to turn on your phone. Wait
until the name of the network operator appears on
the screen.
Call Functions
Making calls
In idle mode, key in the area code, the phone
number and press
to make a call.
Answering calls
Press or to answer a call. Alternatively,
simply open the phone cover to answer a call if the
handset cover is closed (if “Flip Answer” is activated).
Hands free conversation
Press and hold to use the hands free function for
conversation.
Terminating calls
Press or simply close the phone cover to end the
call.
Refusing calls
Press or or simply close the handset cover to
refuse an incoming call. Alternatively, press and hold
or to reject the incoming call without opening the
handset cover.
Emergency calls
In idle mode, key in the emergency call number and
press
to contact the local emergency services
center.
Clear screen
Press and hold to clear an editing entry.
Adjusting the earpiece volume
You can adjust the earpiece volume by using or
to increase or decrease the earpiece volume.
PhoneBook Functions
Add new
Adding new numbers and names to handset or SIM
card.
1. In idle mode, key in the phone number and press
.
2. Select either “Quick Save” ,“Add Name” or “Add
To Exist Name” and press
.
3. If “Quick Save” is selected, the entry will be
stored in the handset without editing.
4. If “Add Name” is selected, perform the following
steps:
(1) Key in the name and press
.
(2) Select either “Save To SIM” or “Save To
Handset” and press
.
(3) If “Save To SIM” is selected, key in the location
number to where the entry to be saved and
press
.
(4) If “Save To Handset” is selected, select the
desired group and press to continue setting
the related information.
(5) Select “Handset”, “Office” “Home” or “Other” to
define the contribute of the entry.
5. If “Add To Exist Name” is selected, perform the
following steps:
(1). Select the location of the new number and
press
.
(2). If the selected location exists a number, it will
be replaced; if the selected location is blank,
the new number will be saved there.
Note
If the selected entry exists in the SIM card, the old
number will be replaced.
Backlight
Backlight
When pressing a key or answering an incoming call,
the backlight will automatically turn on for a few
seconds.