User Manual

Settings
31
2. Press to reject the waiting call.
3. Call Divert
This option is set to divert incoming calls to
the voice mailbox (only for voice messages)
or another phone number, so as not to miss
any important calls.
There are four divert modes available which
you can activate and cancel. You can check its
current status at any time.
Unconditional : Systematically divert all
incoming calls.
When Busy: Divert all incoming calls
when the line is busy (when you are on a
call) or you have rejected the call.
! Call waiting must be disabled to use this
divert function.
No Reply: Divert all incoming calls if
there is no reply (i.e. missed call).
No Response : Divert all incoming calls
when your phone is turned off or out of
coverage.
Cancel All: Cancel all the divert functions.
4.. Own Number Sending
Chooses whether or not your phone
number is sent to the called party. The
availability depends on your network
service provider.
Network
This is a network-related option. It allows you
to register with, search, or select the available
network and some of the relevant settings.
1. Preferred
Al l ows y ou t o br owse, del et e or ed i t t he
cur r ent net wor k l i st , even mor e you can
add t he avai l abl e net wor k al so.
2. Select Mode: Select the network using the
following modes:
Auto Search : It is the default mode for
network registering. It usually searches for
the network operators using the priority
network list in “Preferred”.
Manual Search : Select the network
operator that has a roaming agreement
with your network operator in your
region/country.
y
Once the “Manual Search” mode is
selected, the register mode will not change
until you modify it or replace a new SIM
card.
! If you are not familiar with the network
operator, it is strongly recommended that
you select “Auto Search” mode.
Security
A number of security features are provided to
protect against any unauthorized use of your
SIM card and certain other features. You are
able to change the PIN and PIN2 code,
phone-lock code or decide whether a phone
-lock code or PIN is requested while the
phone is switched on
1. Phone Lock
You can set whether a password is requested
while the phone is switched on. You will be
asked for the codes the next time you switch
on the phone if Phone Lock is on. The default
factory phone lock code is “123456” and you
are allowed to change the code.
y
Input password then press (OK).