User Manual

Settings
32
2. PIN lock (4 to 8 digits)
You can open or close this function.
y
The PIN (Personal Identification Number)
protects the SIM card against unauthorized
use. Normally, the PIN code comes with your
SIM card. If activated, you will be asked for
the PIN every time you switch on the phone.
Please consult your service provider for the
PIN code
3. Password
In this option, you can change password,
PIN, PIN2.
(1).Change phone lock
:
Key in the old code, press (OK)
Key in the new code, press (OK)
(2).Change PIN code
:
Key in the old code , press (OK)
Key in a new code, press (OK)
Key in the new code again and press
(OK)
If an incorrect PIN code is entered 3 times in
succession, the SIM card will be blocked
automatically. Perform the following steps to
unblock the SIM card:
1. Key in the PUK code, press (OK)
2. Key in a new PIN code, press (OK)
3. Key in the new PIN code again and press
(OK)
y
PUK
（
8 digits
）
! The PUK (Personal Unblocking Key)
code is used to release and change the
blocked PIN code. If an incorrect PUK code
is entered 10 times in succession, the SIM
card will be blocked permanently. If the
PUK code does not come with your SIM
card or you have lost it, please check with
your service provider for the code.
y
PIN2
You may change the PIN2 code in this
option. The PIN2 code is provided together
with the SIM card and is only used when
accessing some specific options (such as
“Charge Rate”). It will only be available if
SIM cards and the network service
provider propose this facility. Perform the
procedures described in “PIN lock” to
change the PIN2 code.
! If an incorrect PIN2 code is entered 3
times in succession, the SIM card will be
blocked automatically. Perform the
procedure described above, but key in the
PUK2 code instead of the PUK code.
y
PUK2
(
8 digit
)
The PUK2 code is used to release and
change the blocked PIN2 code. If an
incorrect PUK2 code is entered 10 times in
succession, the SIM card will be blocked
permanently. If the PUK2 code does not
come with your SIM card or you have lost
it, please check with your service provider
for the code.
Set shortcut
This option allows you to set the quick access
function to the key for easy operation.
The following table shows you the default
setting of the shortcut function: