User Manual

Basic Call Operations
9
call.
!
The call waiting function allows you to
manage up to two calls simultaneously (1
active, 1 on hold). To answer the third
incoming call, end one of the active calls, or
establish a multiparty call for the two online
calls and press to answer the third call.
Press to reject the new incoming call.
In-call menu
During a call, you can access the In-call menu
by pressing (Menu). Some of the options
listed in In-call menu may not be available at a
given time and vary depending on your
network operator.
1. Mute : Mutes the mobile phone, the
party on the phone will not hear you.
2. Mute Off: Cancels the mute function,
the party on the phone will hear you.
3. Hand Free: Enables users to talk
without holding the phone.
4. Hold: Places an active call on hold.
5. Send SMS : Sends short messages to
other party during calls. For details of
this operation, refer to “Messages”.
6. Names List: Enables users to check or
edit the data in Phone book during a call.
For details of this operation, refer to
“Phone Book”
7. Send DTMF Tone: Activates or
deactivates the DTMF tone.
8. Build Multiparty Call: Starts a
multiparty conference call with up to 6
participants. For details of this function,
refer to “Multiparty”.
9. Accept Waiting: Answers a new
incoming while you are on the phone.
10. Reject Waiting: Rejects a new
incoming while you are on the phone.
11. End Active Call: Disconnects the
active call when there are two lines on
the phone (1 active, 1 on hold).
12. Swap: Switch between active calls and
calls on hold when in call waiting mode.
13. End Held Call: Ends the call on hold.
14. Recover: Resumes the conversation
with the call on hold.
15. Call divert: Transfers the call to another
phone number.
y
When the multiparty conference call
function is activated, the phone gives you
access to some specific functions. The
availability depends on your network
operator.
16. Filter One Call In Party: Chooses a
participant from the multiparty
conference call for a private
conversation.
17. End One Call In Party: Terminates
the connection with one of the
participants from the multiparty
conference call.
18. Hold Multiparty Calls. Places the
current multiparty conference call on
hold.
19. Retrieve Multiparty Calls: Resumes
conversation with the multiparty
conference call on hold.
20. End Held MPTY: Ends the multiparty
conference call on hold.