User Manual

Access Codes
41
Access Codes
There are several codes required to access the
handset and SIM card. The access codes
allow you to avoid unauthorized use of your
phone and SIM card.
phone and SIM card.
Phone l ock code
Protects your phone against unauthorized use.
This code is supplied with the phone. The
preset code is β€œ123456”. It is strongly
recommend that you change the code before
using the phone. Keep the new code secret
and in a safe place, separate from the phone.
PI N code
The PIN (Personal Identification Number)
protects the card against unauthorized use.
This code is supplied with the SIM card. If
the PIN is set to β€œon”, the code is requested
when the phone is switched on.
If you enter an incorrect PIN code three times
in succession, the SIM card is blocked; key in
the PUK code.
PI N2 code
This code is supplied with the SIM cards and
is required to access certain functions, such as
accumulated costs. If your SIM card supports
those particular functions, you can activate
them in your handset. If you enter an
incorrect PIN2 code three times in succession,
the PIN2 code is blocked and you will be
asked for the PUK2 code.
PUK code
The PUK (Personal Unblocking Key) code is
used to unblock and change the locked PIN
code. This code may be supplied with the
SIM card. If this is not the case, check with
your network service provider for the code. If
you enter an incorrect PUK code ten times in
succession, your SIM card will no longer be
valid.
Contact your network service provider to
replace the SIM card.
PUK2 code
The PUK2 code is used to unblock and
change the locked PIN2 code. This code is
supplied with the SIM. If you enter an
incorrect PUK2 code ten times in succession,
the functions that require PIN2 code in order
to be activated will no longer be valid.
Contact your network service provider to
replace the SIM card.