DB POWER GE) B19 Sydney THE KING OF POWER User Manual Portable Car Jump Starter 2500A 21800mAh For petrol engines below 8L and diesel engines below 6 51
ACTIVATE YOUR 12-MONTH WARRANT Register within 7 days fare receiving your new product PLEASE VISIT US NOW CUSTOMER SERVICE 2 support@dbpowershopcom www thundershower : jp sou boa i rd ! Mow hep sire ol town fr tt resin i hon
A Big Thank You We're thrilled that you have chosen to purchase the DB POWER jump starter. At DB POWER, we're committed to providing you with products that enhance your daily life.
Sg position ATTENTION 1. This device i suitable for petrol engines wt 5. and diesel engines avoid damage tithe device and potent injury, do not attempt tartan engine exceeding tis capacity 2 Don rank the engine for mere tha 3 viscose Allow the jump starter to knoll down for et east | minute fare each 3-score start attempt 3 Your jump starter wil work best tendinitis ull charged If tis ess then 508 charged.
HOW TO JUMP START YOUR CAR 1.
3 Connect the red lamp to the postie) terminal and the black camp to the negatived terminal of the car bribery. The screen on the camps wil show thespian starters current videotape the normal value Is between 14V and 16 Vor light up. The dive wil enter sticky mode: Hate: Hon the". symbol ash a7 the scan, fa camps and Jun Starter wil be disfranchise, and bry sep 283 gain. 4 Sat your engine 5 Remove clamps and pack away.
HOW TO USE THE LED FLASHLIGHT Press and hold the power button for 2 secs to tum on the LED flashlight, ‘short-press to switch modes (high/S0S/strobe).
Sg position ADVICE WARNINGS INDICATED ON THE DISPLAY « LOW VOLTAGE Ww The characters LV" appear on the screen and {3 0 the waning plays once per second. The screen uy will show a voltage lower than 14V. » HIGH VOLTAGE REVERSE CHARGE The characters RE" appear on the screen The RC Sibelius’ Ashes and teaming lone. plays once per second Standby mode will resume immediately onc the ear & complected. = REVERSE POLARITY OR SHORT CIRCUIT The character RISC" appear on the Ase serous. The “+ symbol flashes and the.
Eng » OVERLOAD The clamps will automatically disconnect wham the jump starters voltage i ones os detected lower than during operation. The ** symbol flashes. When the voltage strums fo normal, disconnect the clamps and the device wil resume normal operation.
