User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-302 User Manual
Web: www.dbltek.com
Tel: [phone]
iv. Multiple GM300 radio terminals as users
Setting up RoIP302M:
i. The hardware setup of GM300 is the same as the one shown in Example 1.
ii. Connect the PTT Interface of the ICOMIC-2720 with the PTT Interface Cable supplied as shown in
the diagram below. Connect the RJ-11 plug of the PTT Interface Cable to PTT1 port of the RoIP302M.
iii. Assuming the public IP for the RoIP302M is 202.96.123.123. Its Network Settings
should be configured as shown below.
iv. The DDNS feature should be disabled.
v. A Group SIP Number should be assigned to the RoIP302M. If 3001 is assigned, then the
Call Settings should be configured as shown below.