User manual

得伯乐科技有限公司
DBL Technology Limited RoIP-302 User Manual
Web: www.dbltek.com
Tel: [phone]
ii. GSM Settings
The GSM settings in this section mainly define the password for incoming and outgoing GSM
calls.If it is left blank, then no password is required.
The voice activation detection settings are listed below. This firmware version does not support
this feature yet.
iii. Recorder Settings
The recording settings define the address of the recording server for each group.Please refer to
the RoIP Voice Recording User Manual for more information.
iv. Public Announce (PA) Settings
The RoIP302 provides a relay switch to control a PA system. When the RoIP302 receives the
PA ON Password, it turns on the relay to activate the PA system. Audio is transmitted to the PA
system at this time. When the RoIP302 receives the PA OFF Password, it turns off the relay to
deactivate the PA system. The duration for the relay to be in the ON state is limited by the value set
in the parameter PA ON Expiry. This mechanism shuts down the PA System automatically. The PA
Control Group defines which group has the control over the relay switch. Only the radio terminals
in the group specified can broadcast to the PA System.