User manual

得伯乐科技有限公司

DBL Technology Limited RoIP-302 User Manual

Web: www.dbltek.com

Tel: +86 755 8829 0211

VII. Call settings

The RoIP302 supports up to 3 groups with a unique Group SIP Number. Each RoIP302 must

define at least one group. The Group SIP Number is the only reference between a group and the

PTT ports. If the RoIP is connected to a SIP server, then this number is assigned by the SIP

server administrator.If a peer-to-peer configuration is used, then this number must be unique and is

assigned by the user arbitrary.

For SIP Proxy mode, each RoIP302 are designated as a terminal.The table below describes how

to program the key parameters. Other parameters should be programmed as required by the SIP

proxy.

SIP Proxy Mode Settings

RoIP302 Terminal

Group SIP Number

Assigned by the SIP Proxy

administrator

SIP Proxy

SIP Proxy IP or domain name

Auto Dial Number

The Group SIP Number of the RoIP for voice

connection to be established when a PPT signal

defined in the PPT Setting is active.

For peer-to-peer mode, only two RoIP302s are used for interconnection. One RoIP302 is

defined as a Host which supports a proxy mode for other RoIP302 (referenced as terminal) to