User manual

Http://www.dbltek.com VP-102 / VP-202 User Manual

VoIP Phone Operation

3.1 Making a call

1. Pick up handset.

2. Dial a phone number.

3. Press OK (or # key if enabled) or wait for Auto Dial timeout (programmable in the Preference

page).

For VP-202, the default line is Line 1. If Line 2 is preferred, press L2 instead of OK to make the

call.

3.2 Making a Handsfree Call (Speakerphone / Headset)

1. Press (optional).

2. Dial a phone number.

3. Press OK (or # key if enabled)or wait for Auto Dial timeout.

For VP-202, the default line is Line 1. If Line 2 is preferred, press L2 instead of OK to make the

call.

Depending on the Default Handsfree Device setting, the call will be routed to the specified

device (Speakerphone or headset).

Note: L1/R1 and L2/R2 keys can be redefined as R1 and R2 for other functions. When they are re-

defined as other functions, they will be referred as R1 and R2 The default functions for L1/R1 and

L2/R2 keys are for Line 1(L1) selection and Line 2 (L2) selection respectively.