User manual

Http://www.dbltek.com VP-102 / VP-202 User Manual

location. For example: If SIP Proxy = yousippbx.com, the signaling port is the standard port 5060. If SIP

Proxy = yoursippbx.com:15060, the signaling port is 15060.

5. Registry Expiry(s) – This specifies the expiry duration at the SIP Registrar after a successful registration.

The range is 60 to 36400 seconds.

6. Outbound Proxy – A network node acts as proxy for outbound traffic between a client and a server.

Please contact your network administration to determine if this proxy is available or not.

7. Home Domain – This field enables the use of home domain name is SIP registration instead of IP address.

8. Authentication ID – This field specifies the ID to be used for Authentication during a SIP registration.

9. Password –This field specifies the password used for Authentication during a SIP registration.

10. Backup Server (For Model VP-102 only) – The backup option provides settings for a SIP backup server.

Once the designated SIP Proxy and/ SIP Registrar fail, the backups will be used automatically. Once the

primary servers are up, the phone will switch back automatically.

11. Call Waiting (For Model VP-202 only) – This parameter enables or disables the Call Waiting feature.

12. Call Forward Type – This defines the Call Forward condition and the available options are:

a) Not Forward – Call forward is disabled.

b) Unconditional Forward – Call is always forwarded.

c) Busy Forward – Call is forwarded when the line is in use / engaged.

d) No Answer Forward – Call is forwarded when it is not answered.

e) Busy or No Answer Forward – Call is forwarded when the line is in use or not answered.

13. Forward Number – This defines the number to be used for Call Forward.

14. Voice-mail Number – This defines the access code for the voice mail server when the

key is pressed.

15. Hotline (VP-202) – Hotline is a feature to dial out the preset number automatically whenever the phone

goes off hook. This feature for the corresponding line is enabled when a number is entered. The Line 1

Hotline Number (if set) is dialed out since it is the default line to be used when the phone is off hook. To

dial the Line 2 Hotline Number, press the L2 key directly.

16. Dial Plan (VP-202) – Please see item # 5 of Section 2.4.4.

17. Ring Type (VP-202) – This specifies the ring type for the corresponding line.

18. Auto Answer Mode (VP-202) – This enables the auto answer mode (for the corresponding line) for all

calls or for a list of the calls specified.