User manual

Http://www.dbltek.com VP-102 / VP-202 User Manual

3. PPPoE – This selection is intended for broadband connection (ADSL / Cable modem) that requires dial up /

authentication using PPPoE protocol. Both User Name and Password are required. Please consult your

service provider for more information if needed. One advantage with the PPPoE dial up is that the IP

address obtained for the LAN port is normally a public IP.

More advanced parameters for 802.1q VLAN and MAC settings are available. Please consult your network

administrator for assistance if needed.

PC PORT – The PC port is intended to provide an Ethernet connection to other network devices (for example:

PC, network HUB.). Two modes of operation are available:

1. Bridge mode - This mode allows the network traffics at the PC port to be bypassed to LAN port. This

means that the network device share the same network segment as the LAN port. There is no IP address

assigned to the PC port.

2. Fixed IP - This mode sets the PC port IP Addresss (private IP) and Subnet Mask manually. This creates

a new network segment for the network devices connected to the PC Port.

To simplify network IP assignments, enable the DHCP Server for the PC Port. This allows network

devices connected Port to obtain network IP and related information from the PC Port. Please consult your

network administrator for proper settings of the DHCP Server