User Manual VoIP Phone VP-102/VP-202 DBL Technology Co.,Ltd. Http://www.dbltek.com Support@dbltek.com Sales@dbltek.com Release 1.
Http://www.dbltek.com VP-102 / VP-202 User manual Table of Contents Overview ................................................................................................................................................................. 3 1.1 Key Features ................................................................................................................................................. 3 1.2 Shipping Contents ..................................................................................
Http://www.dbltek.com VP-102 / VP-202 User Manual 1 Overview The VP-100 Series VoIP Phone is designed as a low cost and high performance VoIP phones which supports both H.323 and SIP standards. It offers lots of features and works seamlessly with most of the existing VoIP systems. It is an ideal solution for both residential and business market to replace the traditional analog and digital (pbx) phones. 1.
Http://www.dbltek.com • • • VP-102 / VP-202 User manual Supports NTP and redundant DNS servers NAT-friendly remote upgrade capability (via HTTP) even from behind firewall/NAT router. Proprietary Firewall-Pass-Through Technology 1.2 Shipping Contents Table 1 below shows the contents of the Phone package. Item 4 Description 1 VP-102 / VP-202 Main body 2 Handset 3 Coiled cord 4 Ethernet Straight cable 5 Power Supply (optional) - 12VDC/500mA Output External Power Supply.
Http://www.dbltek.com VP-102 / VP-202 User Manual 1.3 Appearance The VP-102 keypad layout is shown and described below. VP-102 Front View – If Menu mode is not active, press this key to cancel the current operation and resumes to idle LCD display. 1. – If Menu mode is active, press this key to return to the last menu screen. – While the phone is in menu mode. Press this key to confirm the selection or entry. – While the phone is not in a call and a number is entered, press this key to dial the number.
Http://www.dbltek.com VP-102 / VP-202 User manual – While the phone is displaying phone entries or text, press this key to scroll the LCD screen up one line till the top of the screen is reached. – While the phone Is in idle mode, press this key to view the Answered Call List. 6. Down – While the phone is displaying phone entries or text, press this key to scroll the LCD screen down one line till the bottom of the screen is reached.
Http://www.dbltek.com VP-102 / VP-202 User Manual characters: 3 D E F d e f. – For DTMF dialing, press this key to dial the digit “4”. – For menu selection, press this key to select the menu item 4 (if available). 21. – For text input, press this key one or multiple times to enter either one of the following characters: 4 G H I g h i. – For DTMF dialing, press this key to dial the digit “5”. – For menu selection, press this key to select the menu item 5 (if available). 22.
Http://www.dbltek.com VP-102 / VP-202 User manual 1.4 VP-202 Keypad Layout The VP-202 keypad layout is shown and described below. VP-202 Front View – If Menu mode is not active, press this key to cancel the current operation and resumes to idle LCD display. 1. – If Menu mode is active, press this key to return to the last menu screen. – While the phone is in menu mode. Press this key to confirm the selection or entry.
Http://www.dbltek.com VP-102 / VP-202 User Manual up one line till the top of the screen is reached. – While the phone Is in idle mode, press this key to view the Answered Call List. 6. Down – While the phone is displaying phone entries or text, press this key to scroll the LCD screen down one line till the bottom of the screen is reached. – While the LCD is in idle display, press this key to increase the LCD contrast. 7.
Http://www.dbltek.com VP-102 / VP-202 User manual – For DTMF dialing, press this key to dial the digit “2”. 19. – For menu selection, press this key to select the menu item 2 (if available). – For text input, press this key (one or multiple times) to enter either one of the following characters: 2 A B C a b c. – For DTMF dialing, press this key to dial the digit “3”. 20. – For menu selection, press this key to select the menu item 3 (if available).
Http://www.dbltek.com VP-102 / VP-202 User Manual 1.5 Hardware Setup Connect the handset cord to the handset and the base. The handset cord should be wired to the bottom of the base as shown below. The base stand should be snapped on to the based for desktop or wall mount application. VP-102 Bottom View 1.5 Connection Diagram The diagram below shows a typical installation of the device and the installation steps are: 1.
Http://www.dbltek.com VP-102 / VP-202 User manual 2. Optional: Connect an Ethernet cable between the PC port and a computer or network device. It is intended to build a new local network segment (Fixed IP mode) or extend the existing network segment (Bridge mode). 3. Optional: The MIC and EAR ports are intended headset operation. Connect a standard computer headset to these ports. 4. Connect the AC/DC Adapter to the DC12V port and then the AC wall plug.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2 Web Configuration 2.1 Starting Up Upon powering up for the first time, the VP-102 scans for available services for network connections. It will then display the services available and prompt for user input. 1. DHCP service – This means that a local DHCP host is detected. Select this service to enable the phone to obtain IP address and related information for the LAN port from the DHCP host. 2.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2.3 Accessing the Web Configuration Menu Once the IP Address is obtained in Section 2.2, you are now ready to access the built-in web server via a web browser (IE, Firefox, etc.) Enter the IP in the address field to login to the phone web server as shown below. The web browser pops up a login window as shown below. Both VP-102 and VP-202 support two login levels.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2.4 Configuring the VoIP Phone When entering the webpage, the default Status page is displayed as shown in Figure above. The Status page provides a brief summary of the Phone and Network status. Phone Information ¾ Serial Number Each phone is assigned with a unique serial number by the factory. This number is important for auto provision, technical support, and warranty repair.
Http://www.dbltek.com VP-102 / VP-202 User Manual This field shows IP address assigned to the PC port. ¾ PPPoE This field shows the dial up status when PPPoE is enabled for ADSL login. ¾ Default Route The Default Route shows the IP address of the default gateway / router that is used in the current network environment. ¾ DNS Server This field shows the IP address of the DNS server to be used for domain name interpretation.
Http://www.dbltek.com VP-102 / VP-202 User Manual language change is saved, it does not take effect until a new access to the web server. To change the display language immediately, you can select the language icon as shown below. However, this does not change the default language. b) Time Zone – This parameter specifies your local time zone in order for the date/time to be correctly displayed since the date/time obtained from a network time server is referenced to the Greenwich Mean Time (GMT).
Http://www.dbltek.
Http://www.dbltek.com j) VP-102 / VP-202 User Manual Centralized Management – This is a proprietary protocol defined to communicate with phone via a PC program. Please contact your supplier for more information on this feature. This parameter enables this feature. 2.4.2 Network Configuration This page configures the network interface for LAN Port and PC Port. LAN Port – The LAN port is intended for internet access.
Http://www.dbltek.com VP-102 / VP-202 User Manual 3. PPPoE – This selection is intended for broadband connection (ADSL / Cable modem) that requires dial up / authentication using PPPoE protocol. Both User Name and Password are required. Please consult your service provider for more information if needed. One advantage with the PPPoE dial up is that the IP address obtained for the LAN port is normally a public IP. More advanced parameters for 802.1q VLAN and MAC settings are available.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2.4.3 Call Settings This page configures all related settings for VoIP Service. Based on the two protocols (H.323 and SIP) supported, the operation of HT-812P is divided as two Endpoint Types: H.323 Phone and SIP Phone. Some of the parameters are unique to the Endpoint Type and are described separately below. REMARK: Model VP-102 supports only one SIP registration (1 Line). Model VP-202 supports two SIP registrations (2 Lines). 2.4.3.1 H.323 Phone The H.
Http://www.dbltek.com VP-102 / VP-202 User Manual string. Some gatekeepers may use this ID for authentication. 4. Endpoint Mode – Gatekeeper Mode supports making a VoIP call via a call server. Registration to the server is required. Direct Mode supports making a VoIP call by dialing the IP addresses or an alias. 5. Gatekeeper Address - This assigns the location of the Gatekeeper for VoIP Service. 6. Authentication – If H.235 authentication is required, enable this field and enter the H.
Http://www.dbltek.com 1. 2. 3. 4. 5. 6. VP-102 / VP-202 User Manual RAS Port – This Port is used to convey the registration, admissions, bandwidth change, and status messages between two H.323 endpoints. If not specified, the port address is assigned automatically. Q.931 Port – This port is used for call signaling to convey Call Setup and teardown messages between two H.323 endpoints. If not specified, the port address is assigned automatically. H.245 Port – The H.
Http://www.dbltek.com VP-102 / VP-202 User Manual 7. Signaling QoS – This parameter sets the QoS mode for VoIP Signaling for better response time and more reliable VoIP Call signaling. Both IP TOS and Diffserv modes are supported. Please check with your network administrator or ISP for the correct setting. 8.
Http://www.dbltek.com VP-102 / VP-202 User Manual The basic SIP settings are: 1. Phone Number – This parameter assigns the phone number used for SIP registration. 2. Display Name – This parameter (optional) specifies the Caller name and is transmitted as part of the caller ID. 3. SIP Proxy – A SIP Proxy acts as a call manager of all incoming and outgoing calls. Specify the location (IP address / domain name) of the designated SIP Proxy used for SIP service. The standard port used is 5060.
Http://www.dbltek.com VP-102 / VP-202 User Manual location. For example: If SIP Proxy = yousippbx.com, the signaling port is the standard port 5060. If SIP Proxy = yoursippbx.com:15060, the signaling port is 15060. 5. Registry Expiry(s) – This specifies the expiry duration at the SIP Registrar after a successful registration. The range is 60 to 36400 seconds. 6. Outbound Proxy – A network node acts as proxy for outbound traffic between a client and a server.
Http://www.dbltek.com VP-102 / VP-202 User Manual Advanced Settings More settings are available under the Advanced Settings tab. Depending on your network requirements, please consult your network administrator for the correct configuration. 1. Signaling Port – This Port is used to convey signaling message with the SIP Proxy. The standard port number is 5060. 2. NAT Keep-alive – When enabled, a dummy packet I sent to the local firewall / router in order to keep the ports opened for VoIP service. 3.
Http://www.dbltek.com VP-102 / VP-202 User Manual 6. Signaling QoS – This parameter sets the QoS mode for VoIP Signaling for better response time and more reliable VoIP Call signaling. Both IP TOS and Diffserv modes are supported. Please check with your network administrator or ISP for the correct setting. 7. Signaling Encryption – Three types of encryption are supported and they can be enabled individually. These are non-standard encryption for signaling.
Http://www.dbltek.com VP-102 / VP-202 User Manual Mode 1: Use UDP packets and encryption. Mode 2: Use UDP packets and encryption; use single UDP port. Mode 3: Use TCP packets and encryption; Use single TCP port; The mode 2 and mode 3 are the passive and the port use is assigned by the RELAY SERVER. Note: For Service providers, RELAY Proxy software is available at no charge. Please contact your supplier for support. For end user, please contact your service provider to see if this feature is available.
Http://www.dbltek.com VP-102 / VP-202 User Manual 5. Encryption – For secure voice transmission, RC4 and ET263 Encryptions are supported. Please make sure your service provider can support this encryption method before enabling this feature. 6. Symmetric RTP – Enable the media channel to use symmetric RTP ports. Some network environment demand the use of Symmetric RTP. 7. Media NAT Traversal – NAT Traversal can be set independently for Media packets.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2.4.4 Phone Settings The Phone Settings page configures the FXS port and its related operations. They are described in details below. 1. Title on LCD – The text entered here is shown on the LCD as a default message when the phone is idle. 2. Auto Dial – This field enables a number entered to be dialed out automatically once the Auto-Dial Timeout expires. 3.
Http://www.dbltek.com VP-102 / VP-202 User Manual Note: For practical use, it should not be possible to reach the maximum length of the Dial Plan string. Examples: a) Dial Plan = “010:-010” means that the number dialed out will have the first 3 digits ”010” removed when a number with the first digits as “010” is entered. a) Number entered = “01082121234”, actual number dialed = “82121234”. b) Number entered = “82121234”, actual number dialed = “82121234”.
Http://www.dbltek.com VP-102 / VP-202 User Manual Select By List for answering only the number listed on the Auto Answer List (total 10 entries). 2.4.5 Phone Book This page lists all the phone book entries for editing. Just click on New Contact to add a new contact as shown in the window below. Enter the Name (optional) and Number fields and then click shown below.
Http://www.dbltek.com VP-102 / VP-202 User Manual Repeat the above to add more contacts. Click on Edit to edit or Del to delete the corresponding entry. 2.4.5 Tools The Tools section is intended to offer the following functions: Online Upgrade, Change Password, Backup/Restore Configurations, Reset Config, and Reboot as shown below. 2.4.5 .1 Online Upgrade Click on the Online Upgrade tab to perform manual firmware upgrade. Enter the upgrade address as shown below.
Http://www.dbltek.com VP-102 / VP-202 User Manual WARNING: Once the upgrade starts, a message window is displayed to show the upgrade status. DO NOT TURN OFF THE POWER WHILE THE FIRMWARE UPGRADE IS IN PROCESS! 2.4.5 .2 Change Password HT-812P supports two login levels to the built-in webpage. The User level is intended for general user and is restricted from accessing the Call Settings page and Reset Configuration function. In this level, only the password for the user level can be changed.
Http://www.dbltek.com VP-102 / VP-202 User Manual 2.4.5 .4 Reset Configuration This function can only be accessed in administrator login level. Click on the Reset Configuration tab to initiate the reset process. A message windows pops up to ask for confirmation. Click “Yes” to reset all configurations back factory defaults. Click “No” to cancel. Once the reset process is completed, the device reboots itself. 2.4.5 .5 Reboot Click on the Reboot tab to reboot the device. This will take couple minutes. 2.
Http://www.dbltek.com VP-102 / VP-202 User Manual The blocks highlighted in green are available for programming in the URL below. http://xxx.xxx.xxx.xxx//en_US/gain.html The first 3 rows in the gain settings page shows the 3 modes of operation: Handset, Handsfree, and Headset. Each mode uses the same configuration as shown in the block diagram above. The left hand column (first 3 rows) shows the mode of operation.
Http://www.dbltek.com VP-102 / VP-202 User Manual 3 VoIP Phone Operation 3.1 Making a call 1. 2. 3. Pick up handset. Dial a phone number. Press OK (or # key if enabled) or wait for Auto Dial timeout (programmable in the Preference page). For VP-202, the default line is Line 1. If Line 2 is preferred, press L2 instead of OK to make the call. 3.2 Making a Handsfree Call (Speakerphone / Headset) 1. 2. 3. Press (optional). Dial a phone number. Press OK (or # key if enabled)or wait for Auto Dial timeout.
Http://www.dbltek.com VP-102 / VP-202 User Manual 3.3 Answering an Incoming Call Answering a call can be done manually or automatically. 1. Manual Answer Mode to answer the call. For handsfree When the phone rings, just pick up the handset or press mode, the call will be routed to speakerphone or headset depending on the Default Handsfree Device setting. 2.
Http://www.dbltek.com VP-102 / VP-202 User Manual 3.6 Redialing the Last Number (For VP-102 only) 1 Press . 2 Pick up the handset / to dial the number. 1 Pick up the handset / . 2 Press 3 Press OK to dial the number. Or . 3.7 Putting a Call on Hold 1 Press while a call is in progress to hold the call. 2 LCD shows “HOLDING” / Hold LED flashes. 3 A HOLD alerting tone is generated regularly if the handset is placed on the cradle.
Http://www.dbltek.com VP-102 / VP-202 User Manual VP-202: Party A presses L1 (if the current call in using Line 1)/ L2 (if the current call is using Line 2) to put party B on Hold and get a dial to make another call. 3 Party A makes a call to party C. 4 Party C answers the call. 5 Party A presses to start a conference with both party B and C. 3.10 Accessing Voice Messages 1 Press to access your voice mail server.
Http://www.dbltek.com VP-102 / VP-202 User Manual 3. Select Ring Volume. 4. Press Up or Down to increase or decrease the ring volume. Actual ringing is generated to show the ring level set and the LCD also shows the current ring level setting. 5. Press to exit to the last menu level. Alternative: Ring volume level can also be adjusted while the phone is ringing. Just press Up or Down key to adjust the volume level. 3.14 Adjusting the Handset Receiver Volume 1. Pick up the handset 2.
Http://www.dbltek.
Http://www.dbltek.com VP-102 / VP-202 User Manual 6/19/2008 Page 2/2 LINE 1 1. TYPE 1 2. TYPE 2 3. TYPE 3 4. TYPE 4 3 1 1 TYPE 1 RING TYPE 4 AUTOCFG 1. ENABLE (if disabled) 1. DISABLE (if enabled) SET TYPE 1 2 1. LINE 1 2. LINE 2 2 LINE 2 1 1. TYPE 1 2. TYPE 2 3. TYPE 3 4. TYPE 4 SET TYPE 2 3 SPEED DIAL 1. KEY 1 2. KEY 2 . 0. KEY 10 1 4 TYPE 4 SET TYPE 4 DEVICE CFG Login: user Password: 1234 (if enabled) 1. LAN PORT 2. PC PORT 3. GATEWAY 4.
