User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway
8
kind of star command is shown in the table below.
Star(*) Command Function
*01 Read LAN Port IP
*02 Read PC Port IP
*03 Set LAN Port IP. Pick up the handset, press
*03, and then follow the instruction of the
phone to set the IP address.
*04 Set PC Port IP. Pick up the handset, press
*04, and then follow the instruction of the
phone to set the IP address.
*20 Send a remote support request.
*09987456 Reset IP:
LAN Port IP:
192.168.0.1 (The new terminal are DHCP
default)
PC Port IP:
192.168.8.1(The new terminal are Fixed
Mode.)
*11983185922 Reset system configuration. Return to the
default configuration.
Note: These commands are factory preset and cannot be modified.
3.1.2 Star Commands for Phone Operation
The star commands for phone operation are 3-digit long at least and some contains
operands. These star commands are shown in the table below.
Star(*) Command Function
*12 Switch to VOIP line
*21 Switch to PSTN line
*42 Hold the current call / Release the Hold call
*41 Call Transfer to another VoIP Number
*50 Phone book function key
3.2 Set up
The setup of the HT-822P IP ADAPTOR can be done via auto-provisioning if the service
provider supports this feature. Local setup is supported via built-in web pages. To access
the web pages, the LAN or PC port IP address is required. The HT-822P IP ADAPTOR is
equipped with voice prompts to read LAN port and PC port IP addresses via the Phone 1