User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway
40
The Network Configurations screen allows you to set up the IP addresses of the LAN and
PC port, Bridge or Router mode (by selecting or deselecting Bridge Mode), default
Gateway Address, and Primary and Secondary DNS server IP addresses. It includes LAN
port configurations and PC port configurations.
4.8.1 LAN Port configurations
The HT-822P LAN port can be configured to obtain its IP address by DHCP or the IP
address can be set statically (used mainly when using the ATA with a DSL line). There are
three modes to configure LAN port: 1） DHCP, 2） Static IP, 3） PPPoE.
1） DHCP
When you connect to the network through DHCP, the ATA is automatically assigned an IP
address by the router. So you can get the LAN port IP address from the DHCP server.
2） Static IP