User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway

code and it's exact length.

Configuration:

If you set the rule of above example of 3 as follow:

Before: "00:|0:-0+0086|:+0086755".

Now: "00:|0:-0+0086|[1-8]xxxxxxx:+0086755".

Now, the length of local telephone number is limited in 8 bit ,first bit is range from 1 to 8.

Then the gateway will add 0086755 in front of telephone number and dial out.

The second example:

Rule: "0:|13:+0|:+0755"

This rule will automatically add "0" before cell phone, and add 0755 before local dial.

Set as follow:

"0:|13[0-9]xxxxxxxx:+0|[1-8]xxxxxxx:+0755"

This rule holds the same function while cell phone number will be limited in 11 bit and local

dial is 8 bit. In the rule, the string of "13[0-9]xxxxxxxx" means the number from

130xxxxxxxx to 139xxxxxxxx while "[1-8]xxxxxxx" means local telephone number from

1xxxxxxx to 8xxxxxxx .

Attention: Once the bit of the number is defined, it will be abandoned when the code is

longer than the definition length

The third example:

Rule: "0:|13[0-9]xxxxxxxx:+0|[1-8]xxxxxxx:+0755"

We dial out the number "88990011" or "8899001133", and the really we dial is the same

one, which is "075588990011".

Attention:

This rule doesn’t support the gateway of the version before A34HS-3.09-18.

This rule doesn’t support the gateway of the version before A34HS-3.07-18.

4. 5 User Command

The HT-822P have four User Commands, in the “Phone Setting” Web like below screen:

You can change the VoIP and PSTN switch command.

The other two commands:

The Hold Key command:*42

The Transfer Key command;*41

Note: these values are preset by the factory and be cautious to revised.