User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway
34
The RELAY can run in three modes:
Mode 1: The media use UDP packets and encrypt;
Mode 2: The media use UDP packets and encrypt; The UDP packets use single
UDP port;
Mode 3: The media use TCP packets and encrypt; The TCP packets can choice
single TCP port;
The mode 2 and mode 3 is the passiveness, the port was designation from RELAY
SERVER.
Note: This RELAY Proxy is only compatible with the RELAY Server software developed by
HyberTone independently. It was free software; you can come down on us.
4.4.6 Billing Support
HT-822P can support two kinds billing mode. First is using HyberTone’s billing software,
otherwise is using the Reverse Signal.
If you using the HyberTone’s billing software, click the “Billing Support” by the “Call
Setting” and select the Billing software’s version by the “Billing Version”.
The HyberTone’s billing software version2.0 was support fixed billing computer. If you
using the version2.0, you can appoint the billing computer’s IP, enter the IP into Billing
Server field.
The terminal can support billing by normal Reverse Signal. It was without config.
About the HyberTone’s billing software can download by http://www.hybertone.com, it was
free.
4.4.7 Dial Plan
HT－822P apply to the rule dialing out the telephone number ,user can set the rule in the
panel of Call Settings.