User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway

You can configure the Network Tones as Customized option:

The parameters are fill-in as true digits as below format:

nc, rpt, c1on, c1off, c2on, c2off, c3on, c3off, f1, f2, f3, f4, p1, p2, p3, p4

Chapter Descriptor:

nc: number of cadences

rpt: repeat counter(0 - infinite, 1~n - repeat 1~n times)

c1on: cadence one on (in milliseconds)

c1off: cadence one off (in milliseconds)

c2on: cadence two on (in milliseconds)

c2off: cadence two off (in milliseconds)

c3on: cadence three on (in milliseconds)

c3off: cadence three off (in milliseconds)

f1: tone #1, 300-3000(Hz)

f2: tone #2, 300-3000(Hz)

f3: tone #3, 300-3000(Hz)

f4: tone 34, 300-3000(Hz)

p1: attenuation index #1, 0~31(0=3dB, -1dB increments)

p2: attenuation index #2, 0~31(0=3dB, -1dB increments)

p3: attenuation index #3, 0~31(0=3dB, -1dB increments)

p4: attenuation index #4, 0~31(0=3dB, -1dB increments)

For example, you want add a tone as 450Hz and it is run 700 milliseconds and off 1000

milliseconds. You only add below parameters in corresponding option:

1,0,700,1000,0,0,0,0,450,0,0,0,20,0,0,0