User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway
18
The Remote Control star command is *20, this star command’s rule is:
*20 + Server IP + Server Port + #
For examples, if you want send a support request to the engineer and your SIP’s Remote Control
Server’s IP is 222.111.222.111, the Remote Server Port is 1920. You can dial the command like
this: *20222*111*222*111*1920#.
If you set this IP and Port on you device’s Web, you only dial *20#.
4.3.5 Pound(#)Key and Auto-dial Timeout
If you want the terminal send out your telephone number shortly, please click the Pound(#)Key
enable. If it was disable, the terminal will wait period of time after a telephone number is
entered
Set the wait time before auto dialing after a telephone number is entered. Auto dial time is
the period of time from dialing the end number to sending out your dial information, before
the called phone rings.
The range is: 3 to 15 second, the default setting is 5 second.
4.3.6 Network Tone
The Network Tone is the dial tone one hears when he or she picks up the handset to make
a call, and the ring back tone when he or she dial to a number. You can select the network
tones from the following tones as shown in the following screen, depending on the country
where the ATA is located.