User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway

4 Configuration Guide

Before configuring the HT-822P IP ADAPTOR, first you should obtain the LAN or PC IP

address through voice prompt. Follow section 3.1 for detailed information to get the LAN

or PC IP Address.

HT-822P IP ADAPTOR has an embedded Web server that will respond to HTTP

GET/POST requests. It also has embedded HTML pages that allow users to configure the

HT-822P IP ADAPTOR through a Web browser.

4.1 Access the Web Configuration Menu

The HT-822P IP ADAPTOR HTML configuration menu can be accessed via LAN or PC

port:

With the LAN access is enabled, get the LAN IP address of the HT-822P IP ADAPTOR as

described in section 3.1.1. The HT-822P IP Adaptor’s Web Configuration page can then

be accessed by entering the URI into a web browser.

For example Use the LAN port IP address login the HT-822P WEB page. Hypothesis the

LAN port IP is 192.168.2.216, then run IE and input 192.168.2.216 or

http://192.168.2.216to IE’s address field:

http://192.168.2.216

Once this HTTP request is entered and sent from a Web browser, the HT-822P IP

ADAPTOR will respond with the following login screen: