User manual

Http://www.hybertone.com HT-822P VoIP FXS+PSTN Gateway
11
your own PSTN Access Code) at first. Wait for the PSTN dial tone and dial the PSTN
number.
b) If the default connect of FXS MODE in the configuration web is PSTN, dial the phone
number directly.
3.3.4 Send and Receive VoIP Calls
Users can send and receive calls from the VoIP.
A. To receive VoIP calls, just take the phone off hook when it rings.
B. To make a VoIP call:
a) If the default connects is VoIP, dial the number directly.
b) If the default connect is PSTN, press *12 at first and then dial number.
3.3.5 Send by Phone Book
Users can send a phone number in phone book.
Dial *50 and the phone book’s location number.
For example: you want call ‘tony’, then dial ‘*5003’,the terminal will auto dial number
‘008723245897’
3.4 LED Light Pattern Indication
The following table shows the LED light pattern indication.
LED DESCRIPTION
RUN 1. When the device is booting up, the LED
will flash 100ms ON and 100ms OFF.
2. When the device is connected with the
server, the LED will flash 1s ON and 1s
OFF.
3. If the ATA does not boot up, the LED
will not flash.
LAN 1. When the LAN receptacle is connecting
with the network, the LAN LED will light