User manual

http://www.DBL.com FXS+FXO Gateway Series
45
When use PPOE, need to enable Gateway routing, so that the PC that connected to the
Gateway can connect to the Internet correctly. Change the PC Bridge Mode into Standard IP,
configure as follows:
PC port enables standard IP, the mask 2555.2555.2555.0, after enable DHCP, the computer that
connected to the PC port can get arbitrary IP in the range of start address and end address.
Notes: The PC IP could not exist in the same segment with the LAN, in case of conflict.
3.3.3. Call Setting
3.3.3.1. H.323