User manual

得伯乐科技有限公司
DBL Technology Limited GoIP User Manual
Web: www.dbltek.com
Tel: [phone]
The setting is as follows: Select “Forward to PSTN Authentication Mode” > “Trust List
Authentication”. Click the “VoIP Trust Number List”, and the VoIP Trust Number List is displayed
(Maximum 15 trust numbers can be entered). Enter the trust VoIP number in trust number sequence.
If only a VoIP trust number, such as 3306, is set, only the number 3306 can be used to dial the
PSTN from the VoIP.
For a uplink call (from the PSTN to the VoIP), the PSTN trust number shall be entered in the
trust number sequence. The setting is the same as that of the password authentication.
In this mode, the “Call PSTN Dialing Rule/Call VoIP Dialing Rule” parameters are still valid.
For details about the setting, see section “Dialing Rule”.
3.7.2.3 Password or Trust List Authentication
Downlink Uplink
This mode is used to set the above password authentication and trust list authentication at the
same time.
For a downlink call, the authentication mode is as follows: If the number in the trust list is used
to dial the user served by the PSTN, the call will be connected. When the number you dialed is not in
the trust list, you need to enter the password after the secondary dial tone is played. Then, the call will
be connected.
For a uplink call, the authentication mode is as follows: If the mobile number or fixed number in
the trust list is used to dial the user served by the VoIP, the call will be connected. When the number
you dialed is not in the trust list, you need to enter the password after Please Enter the Password is
played. Then, the call will be connected.